reading

This edition first published 2017
© 2017 John Wiley & Sons Ltd

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, except as permitted by law. Advice on how to obtain permission to reuse material from this title is available at http://www.wiley.com/go/permissions.

The right of Chun T. Rim and Chris Mi to be identified as the authors of this work has been asserted in accordance with law.

Registered Offices
John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, USA
John Wiley & Sons Ltd, The Atrium, Southern Gate, Chichester, West Sussex, PO19 8SQ, UK

Editorial Office
The Atrium, Southern Gate, Chichester, West Sussex, PO19 8SQ, UK

For details of our global editorial offices, customer services, and more information about Wiley products visit us at www.wiley.com.

Wiley also publishes its books in a variety of electronic formats and by print-on-demand. Some content that appears in standard print versions of this book may not be available in other formats.

Limit of Liability/Disclaimer of Warranty
While the publisher and authors have used their best efforts in preparing this work, they make no representations or warranties with respect to the accuracy or completeness of the contents of this work and specifically disclaim all warranties, including without limitation any implied warranties of merchantability or fitness for a particular purpose. No warranty may be created or extended by sales representatives, written sales materials or promotional statements for this work. The fact that an organization, website, or product is referred to in this work as a citation and/or potential source of further information does not mean that the publisher and authors endorse the information or services the organization, website, or product may provide or recommendations it may make. This work is sold with the understanding that the publisher is not engaged in rendering professional services. The advice and strategies contained herein may not be suitable for your situation. You should consult with a specialist where appropriate. Further, readers should be aware that websites listed in this work may have changed or disappeared between when this work was written and when it is read. Neither the publisher nor authors shall be liable for any loss of profit or any other commercial damages, including but not limited to special, incidental, consequential, or other damages.

Library of Congress Cataloging-in-Publication data is available for this book.

ISBN 9781119329053 (hardback)

Cover Design: Wiley
Cover Images: (electric car) © Chesky_W/Gettyimages;(smartphone and smart watch) © lcs813/Gettyimages

Contents

Preface

Part I Introduction

1 Introduction to Mobile Power Electronics
1. 1.1 General Overview of Mobile Power Electronics
2. 1.2 Brief History of Mobile Power Electronics
3. 1.3 Remote Mobile Power Transfer (MPT)
4. 1.4 Conclusion
5. References
2 Introduction to Wireless Power Transfer (WPT)
1. 2.1 General Principle of WPT
2. 2.2 Introduction to Inductive Power Transfer (IPT)
3. 2.3 Introduction to Capacitive Power Transfer (CPT)
4. 2.4 Introduction to Resonant Circuits
5. 2.5 Conclusion
6. References
3 Introduction to Electric Vehicles (EVs)
1. 3.1 Overview of EVs
2. 3.2 Classification of EVs
3. 3.3 Technical and Other Issues on EVs
4. References

Part II Theories for Inductive Power Transfer (IPT)

4 Coupled Coil Model
1. 4.1 Introduction to Coupled Coils
2. 4.2 Transformer Model
3. 4.3 M-Model
4. 4.4 T-Model
5. 4.5 Further Discussions and Conclusion
6. 4.6 Appendix
7. Problems
8. References
5 Gyrator Circuit Model
1. 5.1 Introduction
2. 5.2 Representation of Compensation Circuits with Gyrators
3. 5.3 Circuit Characteristics of the Proposed Purely Imaginary Gyrator
4. 5.4 Analyses of Perfectly Tuned Compensation Circuits with the Proposed Method
5. 5.5 Analyses of Mistuned Compensation Circuits with the Proposed Method
6. 5.6 Example Design and Experimental Verifications
7. 5.7 Conclusion
8. Problems
9. References
6 Magnetic Mirror Model
1. 6.1 Introduction
2. 6.2 Improved Magnetic Mirror Models for Coils with Open Core Plates
3. 6.3 Improved Magnetic Mirror Models for a Coil with Parallel Core Plates
4. 6.4 Example Design and Experimental Verifications
5. 6.5 Conclusions
6. Problems
7. References
7 General Unified Dynamic Phasor
1. 7.1 Introduction
2. 7.2 Complex Laplace Transformation for AC circuits
3. 7.3 Analyses of Complex Laplace Transformed Circuits
4. 7.4 Verifications of Complex Laplace Transformed Circuits by Simulation
5. 7.5 Conclusion
6. Problems
7. References

Part III Dynamic Charging for Road-Powered Electric Vehicles (RPEVs)

8 Introduction to Dynamic Charging
1. 8.1 Introduction to RPEV
2. 8.2 Functional Requirements (FRs) and Design Parameters (DPs) of OLEV
3. 8.3 Discussion: Future Prospect of RPEV
4. 8.4 Concluding Remarks: The Need for Dynamic Charging
5. References
9 History of RPEVs
1. 9.1 Introduction
2. 9.2 Fundamentals of Wireless Power Transfer Systems for RPEV
3. 9.3 Early History of RPEV
4. 9.4 Developments of On-Line Electric Vehicles
5. 9.5 A Few Technical and Economic Issues of OLEV
6. 9.6 Research Trends of Road powered Electric Vehicles by Other Research Teams
7. 9.7 Interoperable IPT: The Sixth-Generation (6G) OLEV
8. 9.8 Conclusion
9. References
10 Narrow-Width Single-Phase Power Rail (I-type)
1. 10.1 Introduction
2. 10.2 Narrow-Width I-Type IPTS Design
3. 10.3 Analysis of the Fully Resonant Current-Source IPTS
4. 10.4 Example Design and Experimental Verification
5. 10.5 Conclusion
6. Problems
7. References
11 Narrow-Width Dual-Phase Power Rail (I-type)
1. 11.1 Introduction
2. 11.2 Design of the Proposed dq-Power Supply Rail
3. 11.3 Circuit Design of the Proposed IPTS
4. 11.4 Example Design and Experimental Verifications
5. 11.5 Conclusion
6. Problems
7. References
12 Ultra-Slim Power Rail (S-type)
1. 12.1 Introduction
2. 12.2 Ultra-Slim S-type Power Supply Rail Design
3. 12.3 Example Design and Experimental Verifications
4. 12.4 Fabrication of the Flexible S-Type Power Supply Module
5. 12.5 Conclusion
6. Problems
7. References
13 Controller Design of Dynamic Chargers
1. 13.1 Introduction
2. 13.2 Large Signal Dynamic Model for the OLEV IPTS
3. 13.3 Example Design and Experimental Verifications
4. 13.4 Conclusions
5. Problems
6. References
14 Compensation Circuit
1. 14.1 Introduction
2. 14.2 Comparative Evaluations of the Eight Basic Compensation Schemes
3. 14.3 Equivalence and Duality of I-SS and I-SP
4. 14.4 A Design Guideline for I-SS and I-SP
5. 14.5 Example Design and Experimental Verifications
6. 14.6 Conclusion
7. References
15 Electromagnetic Field (EMF) Cancel
1. 15.1 Introduction
2. 15.2 Proposed General Active EMF Cancel Methods
3. 15.3 Design Examples of Active EMF Cancels for WEV
4. 15.4 EMF Cancel Design and Analysis of the I-Type IPTS of OLEV
5. 15.5 Example Design and Experimental Verifications for the I-Type IPTS of OLEV
6. 15.6 Conclusion
7. Problems
8. References
16 Large Tolerance Design
1. 16.1 Introduction
2. 16.2 Self-Decoupled Dual Pick-up coils with an I-Type Power Supply Rail
3. 16.3 Example Design and Experimental Verifications
4. 16.4 Conclusions
5. Problems
6. References
17 Power Rail Segmentation and Deployment
1. 17.1 Introduction
2. Nomenclature
3. 17.2 Cross-Segmented Power Supply Rail Design
4. 17.3 Example Design and Experimental Verifications of the X-Rail
5. 17.4 Conclusion
6. Problems
7. References

Part IV Static Charging for Pure EVs and Plug-in Hybrid EVs

18 Introduction to Static Charging
1. 18.1 The Need for Electric Vehicles (EVs) and Wireless Electric Vehicles (WEVs)
2. 18.2 Overview of Existing Static EV Chargers
3. 18.3 Design Issues on Static EV Chargers
4. 18.4 Standard and Regulation Issues on Static EV Chargers
5. 18.5 Conclusion
6. Problems
7. References
19 Asymmetric Coils for Large Tolerance EV Chargers
1. 19.1 Introduction
2. 19.2 Design of Proposed IPTS for EV Chargers
3. 19.3 Example Design and Experimental Verifications
4. 19.4 Conclusion
5. Problems
6. References
20 DQ Coils for Large Tolerance EV Chargers
1. 20.1 Introduction
2. 20.2 Example Design and Simulation Verifications
3. 20.3 Experimental Verification for the Example Design
4. 20.4 Conclusion
5. Problems
6. References
21 Capacitive Power Transfer for EV Chargers Coupler
1. 21.1 Introduction
2. 21.2 Four-Plate Structure and Its Circuit Model
3. 21.3 Double-Sided LCL Compensation Topology
4. 21.4 Prototype Design
5. 21.5 Experimental Verifications
6. 21.6 Conclusion
7. Problems
8. References
22 Foreign Object Detection
1. 22.1 Introduction
2. 22.2 Non-overlapped Coil Sets for FOD and POD
3. 22.3 Example Design and Experimental Verifications
4. 22.4 Conclusion
5. Problems
6. References

Part V Mobile Applications for Phones and Robots

23 Review of Coupled Magnetic Resonance System (CMRS)
1. 23.1 Introduction
2. 23.2 Static Analysis and Design of the Proposed CMRS with Impedance Transformers
3. 23.3 Example Design and Experimental Verifications
4. 23.4 Discussion on Phase and EMF Cancel
5. 23.5 Conclusion
6. Problems
7. References
24 Mid-Range IPT by Dipole Coils
1. 24.1 Introduction
2. 24.2 Primary and Secondary Coil Design
3. 24.3 Example Design and Experimental Verifications of the IPTS
4. 24.4 Conclusion
5. Problems
6. References
25 Long-Range IPT by Dipole Coils
1. 25.1 Introduction
2. 25.2 Analysis and Design of the Proposed Extremely Loosely Coupled Dipole Coils
3. 25.3 Example Design and Experimental Verifications of the Proposed IPTS
4. 25.4 Conclusion
5. Problem
6. References
26 Free-Space Omnidirectional Mobile Chargers
1. 26.1 Introduction
2. 26.2 Evaluation of DoF on Various Power Transfers
3. 26.3 Omnidirectional Wireless Power Transfers by Loop Coils
4. 26.4 Analysis and Design of the Proposed Crossed Dipole Coils
5. 26.5 Example Design and Experimental Verifications
6. 26.6 Conclusion
7. Problems
8. References
27 Two-Dimensional Omnidirectional IPT for Robots
1. 27.1 Introduction
2. 27.2 Overall System Configuration
3. 27.3 Design and Fabrication of the IPTS for Mobile Robots
4. 27.4 Example Design and Experimental Verifications of the Design
5. 27.5 Conclusion
6. Problems
7. References

Part VI Special Applications of Wireless Power

28 Magnetic Field Focusing
1. 28.1 Introduction
2. 28.2 Overview of 1-D SMF Technology
3. 28.3 Example Design and Experimental Verifications
4. 28.4 Conclusion
5. Problems
6. References
29 Wireless Nuclear Instrumentation
1. 29.1 Introduction
2. 29.2 Design of the proposed highly reliable power and communication system
3. 29.3 Example Design and Experimental verifications
4. 29.4 Conclusion
5. Problems
6. References
30 The Future of Wireless Power
1. 30.1 Future Areas of WPT
2. 30.2 Competing Technologies in Future WPT
3. 30.3 Conclusions
4. Reference

Index

EULA

List of Table

Chapter 1

Table 1.1

Chapter 5

Table 5.1

Chapter 9

Table 9.1

Chapter 10

Table 10.1
Table 10.2
Table 10.3

Chapter 11

Table 11.1

Chapter 12

Table 12.1
Table 12.2
Table 12.3

Chapter 14

Table 14.1
Table 14.2
Table 14.3

Chapter 15

Table 15.1

Chapter 16

Table 16.1

Chapter 17

Table 17.1
Table 17.2
Table 17.3

Chapter 18

Table 18.1
Table 18.2
Table 18.3

Chapter 19

Table 19.1
Table 19.2

Chapter 20

Table 20.1

Chapter 21

Table 21.1
Table 21.2
Table 21.3
Table 21.4

Chapter 22

Table 22.1
Table 22.2
Table 22.3

Chapter 23

Table 23.1

Chapter 24

Table 24.1
Table 24.2

Chapter 25

Table 25.1
Table 25.2
Table 25.3
Table 25.4

Chapter 26

Table 26.1
Table 26.2
Table 26.3

Chapter 27

Table 27.1
Table 27.2

Chapter 28

Table 28.1

Chapter 29

Table 29.1
Table 29.2
Table 29.3

Wireless Power Transfer for Electric Vehicles and Mobile Devices