Cover page

Table of Contents

Title page

Copyright page

Preface

Acknowledgements

List of Drawings

List of Tables

List of Diagrams

Glossary of Terms and Abbreviations

1: Introduction

1.1 Introduction

1.2 Standard Methods of Measurement

1.3 Contract Documentation

2: A Practical Introduction to Measurement

2.1 A Practical Introduction to Measurement

2.2 Measurement Procedure

3: Corners

3.1 Measurement Information

3.2 Methodology

3.3 Practical Application: Corners

4: Substructure

4.1 Measurement Information

4.2 Technology

4.3 Practical Application: Substructure to Doctors' Surgery

5: Basement

5.1 Measurement Information

5.2 Technology

5.3 Practical Application: Brick Basement To Adjacent Building

6: Sloping Site

6.1 Measurement Information

6.2 Technology

6.3 Practical Application: Pair Of Houses

7: Underpinning

7.1 Measurement Information

7.2 Technology

7.3 Practical Application: Underpinning To Basement

8: Reinforced Concrete Frame

8.1 Measurement Information

8.2 Technology

8.3 Practical Application: Reinforced Concrete Frame

9: Brickwork

9.1 Measurement Information

9.2 Technology

9.3 Practical Application: Brickwork

10: Openings, Doors and Windows

10.1 Measurement Information

10.2 Technology

10.3 Practical Application: Openings, Doors and Windows

11: Flat Roofs

11.1 Measurement Information

11.2 Technology

11.3 Practical Application: Flat Roof

12: Pitched Roofs

12.1 Measurement Information

12.2 Technology

12.3 Practical Application: Pitched Roof

13: Steelwork

13.1 Measurement Information

13.2 Technology

13.3 Practical Application: Agricultural Building

14: Partitions

14.1 Measurement Information

14.2 Technology

14.3 Practical Application: Hostel First Floor

15: Curtain Walling

15.1 Measurement Information

15.2 Technology

15.3 Practical Application: Aircraft Showroom Gridline 1

16: Finishes

16.1 Measurement Information

16.2 Technology

16.3 Practical Application: Medical Centre

17: Drainage

17.1 Measurement Information

17.2 Technology

17.3 Practical Application: West Wing

18: Domestic Plumbing

18.1 Measurement Information

18.2 Technology

18.3 Practical Application: Penthouse Hot and Cold Water and Soil and Waste Pipework

19: Mechanical Services

19.1 Measurement Information

19.2 Technology: Air Conditioning

19.3 Practical Application: Penthouse Air Conditioning

20: Electrical Services

20.1 Measurement Information

20.2 Technology

20.3 Practical Application: Penthouse Small Power

21: External Works

21.1 Measurement Information

21.2 Technology

21.3 Practical Application: Retaining Walls

22: Preliminaries

22.1 Introduction

22.2 Overheads and Profit (NRM 1 p. 39)

22.3 Practical Application: Schedule Of Preliminaries

23: Computer Aided Taking Off

23.1 Introduction

23.2 Screen Based Learning

23.3 Practical Application: Click by Click Guide to CATO

24: Preparation of Bills of Quantities

24.1 BQ Preparation

24.2 Practical Application: Abstract and BQ for Reinforced Concrete Frame

References

Index

Title page

Preface

‘Measurement using the New Rules of Measurement’ is intended to provide some guidance on how to measure quantities in accordance with NRM 2 using comprehensive and detailed examples of most of the sections in the NRM 2.The text and examples have been drawn from my professional and academic practice as a chartered quantity surveyor and lecturer.

The publication by the RICS of the suite of New Rules of Measurement (NRM) provides a prescriptive approach to the measurement of quantities throughout the construction process. The second of these, NRM 2, provides new methods of measurement for work in separate trades. As is often the case with innovations, some guidance can be useful and a commentary with examples and exercises on how to use NRM 2 is therefore appropriate.

The publication of the RICS Black Book guidance notes on acceleration and damages for delay to completion provides best practice to the quantity surveying profession and could, perhaps, indicate further developments in standard methods of measurement in an area very much in need of an accurate and consistent approach.

For students and practitioners the acquisition of technical competencies is by practice. A textbook can only provide an introduction. For this reason each chapter has a step-by-step worked example that can be followed and an opportunity to practise with an exercise on each topic. Development can be monitored by using the self-assessment marking sheets that are also provided.

A work like this will contain errors and they are entirely my own responsibility. I would be grateful for your assistance if you would be kind enough to please point out these errors and I will correct them at the first opportunity. I am also aware that some of the opinions in this volume will not be shared by all. I welcome your opinions which I will carefully consider.

Sean D.C. Ostrowski

Summer 2012

Acknowledgements

The author and the publisher would like to thank the following individuals and organizations for their kind permission to use the material as described below:

Barry Symonds for allowing me to use the drawings and my lecture notes.

Andrew Bateson at Cadwyn Housing Association for the use of the partition, flat roof and external works drawings.

Paul Hunt at St George Central London Ltd for the use of the services drawings and the steelwork pergola.

Balkees Noor Mohamed at the College of Estate Management for the use of the drainage drawings.

Tim Cook at Causeway Technologies Limited for the use of the CATO examples.

Palgrave for the use of the windows and door openings drawings.

Phil Young at CEREA for the use of the curtain walling drawings.

Wiley-Blackwell for the use of the sloping site, underpinning and RC frame drawings.

Many people have read and commented on parts of the manuscript and they have my sincere thanks and gratitude:

My wife, Sally, for her assistance with proof reading.

Keith Tweedy for his careful appraisal and discussions on the NRMs.

David Benge for our initial discussions on NRM 1.

Professor Allan Ashworth for his encouragement and tolerance.

David Hockley, RIBA, and Matthew Boughton who despite busy workloads prepared many of the drawings.

Ben Taylor.

David Quarmby of Glamorgan University.

Simon Pope at Causeway Technologies Limited.

The students of several institutions whom I have been privileged to teach who diligently and sometimes gleefully but always in good humour pointed out everything that they could find that was wrong or inconsistent and were kind enough to tell me what they found difficult about what they were being taught.

My publishers Wiley Blackwell for their encouragement and comments for which I am profoundly grateful.

List of Drawings

Practical applicationsSelf-assessment exercises
Protocol photographs 1–4
SDCO/2/E3/1 Corners
SDCO/2/4/1 Substructure planSDCO/2/E4/1 Trench
SDCO/2/4/2 Substructure section
SDCO/2/5/1 Basement planSDCO/2/E5/1 Basement plan and section
SDCO/2/5/2 Basement section
SDCO/2/6/1 Sloping site planSDCO/2/E6/1 Sloping site plan
SDCO/2/6/2 Sloping site sectionsSDCO/2/E6/2 Sloping site section 1
SDCO/2/E6/3 Sloping site section 2
SDCO/2/7/1 Underpinning planSDCO/2/E7/1 Underpinning
SDCO/2/7/2 Underpinning section
SDCO/2/8/1 Reinforced concrete frame plan and detailsSDCO/2/E8/1 Formwork
SDCO/2/8/2 Reinforced concrete frame section
SDCO/2/9/1 Brickwork planSDCO/2/E9/1 Plan
SDCO/2/9/2 Brickwork elevationsSDCO/2/E9/2 Casement window
SDCO/2/9/3 Brickwork details 1SDCO/2/E9/3 Circular window
SDCO/2/9/4 Brickwork details 2SDCO/2/E9/4 External door
SDCO/2/9/5 Brickwork details 3
SDCO/2/10/1 Windows elevation, section and details
SDCO/2/10/2 Glazing
SDCO/2/11/1 Flat roof planAs Chapter 11
SDCO/2/11/2 Flat roof section and details
SDCO/2/12/1 Pitched roof plan and sectionSDCO/2/E12/1 Pitched roof
SDCO/2/13/1 Steelwork plan and sectionsSDCO/2/E13/1 Pergola
SDCO/2/14/1 Partitions first floor planSDCO/2/E14/1 Partitions ground floor plan
SDCO/2/14/2 Partitions section
SDCO/2/15/1 Curtain walling plan and detailsSDCO/2/E15/1 Curtain walling
SDCO/2/15/2 Curtain walling details
SDCO/2/16/1 Finishes planAs Chapter 16
SDCO/2/16/2 Finishes elevation
SDCO/2/17/1 Drainage planSDCO/2/E17/1 Drainage plan
SDCO/2/18/1 Hot and cold water planSDCO/2/E18/1 Plumbing plan
SDCO/2/18/2 Soil and waste pipeworkSDCO/2/E18/2 Plumbing isometric
SDCO/2/18/3 Schematic cold water
SDCO/2/19/1 Air conditioning planSDCO/2/E219/1 Ventilation
SDCO/2/19/2 Air conditioning sections
SDCO/2/19/3 Air conditioning details
SDCO/2/20/1 Small power planSDCO/2/20/E1 Lighting layout
SDCO/2/20/2 Power symbolsSDCO/2/20/E2 Lighting symbols
SDCO/2/20/E3 Cable schematic
SDCO/2/21/1 Retaining wall plan 1As Chapter 21
SDCO/2/21/2 Retaining wall plan 2
SDCO/2/21/3 Retaining wall elevation and section

List of Tables

Table 2.1 Measurement protocols.

Table 2.2 Levels for the measurement of reinforced concrete columns.

Table 2.3 A comparison of levels between NRM 1 and NRM 2.

Table 2.4 Compound item.

Table 3.1 Query sheet.

Table 3.2 Practical application: Corners.

Table 4.1 Substructure specification.

Table 4.2 Substructure query sheet.

Table 4.3 Practical application: Substructure to doctors' surgery.

Table 5.1 Basement: sloping site specification.

Table 5.2 Basement query sheet.

Table 5.3 Practical application: Brick basement to adjacent building.

Table 6.1 Sloping site specification.

Table 6.2 Sloping site query sheet.

Table 6.3 Practical application: Pair of houses.

Table 7.1 Underpinning specification.

Table 7.2 Underpinning query sheet.

Table 7.3 Practical application: Underpinning to basement.

Table 7.4 Underpinning compound measurement.

Table 8.1 Reinforced concrete frame specification.

Table 8.2 Reinforced concrete frame query sheet.

Table 8.3 Practical application: Reinforced concrete frame.

Table 9.1 Brickwork specification.

Table 9.2 Brickwork query sheet.

Table 9.3 Practical application: External and internal walls in brickwork.

Table 10.1 Openings and windows specification.

Table 10.2 Openings and windows query sheet.

Table 10.3 Practical application: Openings, doors and windows.

Table 11.1 Flat roof specification.

Table 11.2 Flat roof query sheet.

Table 11.3 Practical application: Flat roof.

Table 12.1 Pitched roof specification.

Table 12.2 Pitched roof query sheet.

Table 12.3 Practical application: Pitched roof.

Table 13.1 Steelwork specification.

Table 13.2 Steelwork query sheet.

Table 13.3 Practical application: Steelwork to agricultural building.

Table 14.1 Partitions specifications.

Table 14.2 Partitions query sheet.

Table 14.3 Finishes spreadsheet.

Table 14.4 Practical application: Hostel first floor.

Table 15.1 Curtain walling specification.

Table 15.2 Curtain walling query sheet.

Table 15.3 Practical application: Aircraft showroom gridline 1.

Table 16.1 Finishes specification.

Table 16.2 Finishes query sheet.

Table 16.3 Practical application: Medical centre.

Table 16.4 Finishes dimensions.

Table 16.5 Floor finishes.

Table 16.6 Wall finishes.

Table 16.7 Ceiling finishes.

Table 16.8 Finishes quantities check.

Table 17.1 Drainage specification.

Table 17.2 Drainage query sheet.

Table 17.3 Practical application: Drainage.

Table 17.4 Manhole schedule.

Table 17.5 Pipework schedule 1.

Table 17.6 Pipework schedule 2.

Table 17.7 Pipework schedule 3.

Table 17.8 Pipework schedule 4.

Table 17.9 Pipework schedule 5.

Table 17.10 Drainage quantities check.

Table 18.1 Plumbing specification.

Table 18.2 Plumbing query sheet.

Table 18.3 Insulation, sleevework and fire stopping.

Table 18.4 Practical application: Penthouse hot and cold water and soil and waste pipework.

Table 19.1 Air conditioning specification.

Table 19.2 Air conditioning query sheet.

Table 19.3 Practical application: Penthouse air conditioning.

Table 20.1 Small power specification.

Table 20.2 Small power query sheet.

Table 20.3 Practical application: Penthouse small power.

Table 21.1 Retaining wall specification.

Table 21.2 Retaining wall query sheet.

Table 21.3 Practical application: Retaining walls.

Table 22.1 Sample spreadsheet layout for measuring preliminaries.

Table 22.2 Preliminaries example.

Table 22.3 Preliminaries calculations required: 1.

Table 22.4 Preliminaries calculations required: 2.

Table 22.5 Preliminaries calculations required: 3.

Table 22.6 Practical application: Preliminaries site wide.

Table 23.1 Click by click guide to CATO: 1.

Table 23.2 Click by click guide to CATO: 2.

Table 23.3 Click by click guide to CATO: 3.

Table 23.4 Click by click guide to CATO: 4.

Table 23.5 Click by click guide to CATO: 5.

Table 23.6 Click by click guide to CATO: 6.

Table 23.7 Click by click guide to CATO: 7.

Table 24.1 Practical application: Abstract of reinforced concrete frame in Chapter 8.

Table 24.2 Practical application: BQ of reinforced concrete frame in Chapter 8.

List of Diagrams

Diagram 4.1 Foundation spread: section.

Diagram 4.2 Foundation spread: plan.

Diagram 4.3 Backfill to trenches.

Diagram 6.1 Cut and fill line.

Diagram 6.2 Cut gridlines and calculations.

Diagram 6.3 Fill gridlines and calculations.

Diagram 6.4 Step in foundations.

Diagram 7.1 Underpinning bays.

Diagram 9.1 Brickwork internal walls.

Diagram 9.2 Lintels.

Diagram 12.1 Fixing details for a typical sloping roof with clay tiles.

Diagram 17.1 Typical PCC manhole details.

Diagram 18.1 Typical plumbing installation.

Glossary of Terms and Abbreviations