Fabio Giannino
IDS GeoRadar s.r.l.Pisa, Italy
and
Giovanni Leucci
Institute of Heritage Sciences (ISPC)
National Research Council of Italy (CNR)
Lecce, Italy
This edition first published 2022
© 2022 John Wiley & Sons, Inc.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, except as permitted by law. Advice on how to obtain permission to reuse material from this title is available at http://www.wiley.com/go/permissions.
The right of Fabio Giannino and Giovanni Leucci to be identified as the authors of this work has been asserted in accordance with law.
Registered Office
John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, USA
Editorial Office
111 River Street, Hoboken, NJ 07030, USA
For details of our global editorial offices, customer services, and more information about Wiley products visit us at www.wiley.com.
Wiley also publishes its books in a variety of electronic formats and by print‐on‐demand. Some content that appears in standard print versions of this book may not be available in other formats.
Limit of Liability/Disclaimer of Warranty
While the publisher and authors have used their best efforts in preparing this work, they make no representations or warranties with respect to the accuracy or completeness of the contents of this work and specifically disclaim all warranties, including without limitation any implied warranties of merchantability or fitness for a particular purpose. No warranty may be created or extended by sales representatives, written sales materials or promotional statements for this work. The fact that an organization, website, or product is referred to in this work as a citation and/or potential source of further information does not mean that the publisher and authors endorse the information or services the organization, website, or product may provide or recommendations it may make. This work is sold with the understanding that the publisher is not engaged in rendering professional services. The advice and strategies contained herein may not be suitable for your situation. You should consult with a specialist where appropriate. Further, readers should be aware that websites listed in this work may have changed or disappeared between when this work was written and when it is read. Neither the publisher nor authors shall be liable for any loss of profit or any other commercial damages, including but not limited to special, incidental, consequential, or other damages.
Library of Congress Cataloging‐in‐Publication Data
Names: Giannino, Fabio, author. | Leucci, Giovanni, author.
Title: Electromagnetic methods in geophysics : applications in GeoRadar, FDEM, TDEM, and AEM / Fabio Giannino and Giovanni Leucci.
Description: Hoboken, NJ : Wiley, 2022. | Includes bibliographical references and index.
Identifiers: LCCN 2021027149 (print) | LCCN 2021027150 (ebook) | ISBN 9781119770985 (hardback) | ISBN 9781119770992 (adobe pdf) | ISBN 9781119771005 (epub)
Subjects: LCSH: Magnetic prospecting. | Ground penetrating radar.
Classification: LCC TN269 .G433 2022 (print) | LCC TN269 (ebook) | DDC 622/.153–dc23
LC record available at https://lccn.loc.gov/2021027149
LC ebook record available at https://lccn.loc.gov/2021027150
Cover Design: Wiley
Cover Image: © Fabio Giannino
Geophysical techniques have many environmental, archaeological, forensic, geological, geotechnical, or engineering applications, as well as in the oil and gas, the mining industry, or for general academic research. Because of this, all the aspects connected with the logistics, designing, data collection, analysis, interpretation, and visualization, must be evaluated on a case‐by‐case basis.
Regardless of the geophysical technique deployed for a specific subsoil exploration campaign, the final objective is always to search for the variations of a specific physical property of the system to be investigated, and to infer the possible anthropogenic or natural factor(s), which caused the variation itself.
The properties which, more often, are the main subject of an applied geophysics measurements campaign are the electrical conductivity (electrical resistivity), the seismic waves velocity propagation (either in their vertical and/or horizontal component), the EM waves velocity propagation, the dielectric constant, the magnetic field, the gravity acceleration, and so on. Measuring of the abovementioned properties, in boreholes, on surface, in the sea, or airborne, is carried out with instrumentation specifically designed and manufactured, and the data gathered through these tools, are analyzed by means of specific software, whose proper use allows even very small variations of a given quantity to be highlighted. The survey and laboratory/office operations addressed to the acquisition and analysis of such specific data, result in those geophysical methodologies known as Geoelectrical techniques, EM induction methods, seismic methods (seismic refraction, seismic reflection, seismic tomography, MASW, Re.Mi.), ultrasound, Ground Penetrating Radar (GPR), Magnetic method, Micro‐gravimetry, and so on.
The list outlined is obviously partial, but on the other hand may be useful to give an idea of the macro‐areas within which the most commonly used geophysical techniques can be allocated, with respect to the industry, the academic research, or in the professional services activities.
Tools deployed for the data acquisition, as well as the software to be used for the purposes of data processing and visualization, improved very much in the last three decades, and became rather complex and of a specific use. Moreover, the possibility to apply a specific technique for the purposes of a given project, cannot disregard the knowledge of the theoretical basis on which every geophysical technique is founded on. As a direct consequence of this, a poor awareness on the hardware, the software, and the theoretical aspects, will most likely lead to a geophysical approach, whose possibility of technical success is low.
Another very important factor in planning and performing a geophysical survey, is the collection of the greater possible amount of information relating to the nature, dimension, geometry, and burial depth of the “target” of the measurements campaign, and the (geological) background where the “object” is imbedded. In this case, the word “target” means every buried feature determining a contrast in physical properties detectable by the technique. The knowledge of this, can also positively contribute to selecting the geophysical technique, which increases the probability to maximize the differences of a given physical property between the background and the target. Hence, the possibility to locate the latter with a higher degree of confidence and increasing the resolution of the final result.
Many geophysical techniques are based on the propagation in the space of electromagnetic (EM) waves (wave field methods), and a unique classification of them can be difficult and, to a certain extent, of no use. However, in order to optimize the results deriving from their application to project‐related issues, it is of a paramount importance to have a clear idea about the existing EM techniques and what are the characteristics differentiating one from another. To do this, it may be used as a classification factor, at a first instance, the fact that a known amplitude and frequency transmitter may be used as a source of EM energy, as it happens for the TDEM methods, FDEM methods, as well as in the GPR techniques; on the other hand, also the interaction with the subsoil of natural sources of EM energy can be used as EM energy, as in the magnetotelluric methods (MT), the audio magnetotelluric (AMT), or in the audio frequency magnetotelluric (AFMAG). Under this point of view, EM techniques may be classified into active, the former, and passive, the latter.
Another way to differentiate one EM technique or one group of EM techniques, is the fact that the EM signal generated from an AC current having a known amplitude and frequency content, is emitted continuously (FDEM methods), or that the transmitting coil spreads out a transient EM signal of known amplitude and frequency, and that a receiver coil measures the time decay of the emitted EM signal interacting with the subsoil, after that the transmitter is been switched off (TDEM methods).
EM methods can be further classified based on the relative position between transmitter and receiver coils: these can have a fixed or variable relative distance. On the basis of this aspect we may distinguish the Turam method (D.S. Parasnis, 1979), the Slingram, the ground conductivity meter (GCM), the Very Low Frequency (VLF). Furthermore, P.V. Sharma (1996), introduced an EM methods classification, depending on the fact that the primary EM field may be continuous, transient, or broadband; according to this we may have:
Regardless, all EM methods are deployed with the common aim of characterizing the subsoil on the base of its electrical conductivity and dielectrical constant.
As is known, the purpose of these methods is to deduce the physical properties of the Earth and its internal constitution from the physical phenomena associated with it. On the other hand, the objective is to investigate, with a very high resolution and a relatively smaller scale, more superficial features present in the Earth's crust. Typically, the investigation of these characteristics provides an important contribution to practical problems, such as oil exploration, the identification of water resources, mining exploration, pollutant research, bridge and road construction, and civil engineering. The presence of bodies or structures in the subsoil is highlighted by measuring at the surface variations of some physical parameters in the subsoil itself. In practice, some measurements of a given physical field (i.e. electromagnetic) are carried out at the surface of a given area. If the subsoil were perfectly homogeneous, regardless of the position in which the measurement is carried out, the same value of the measured physical parameter would always be obtained. Assuming, instead, that in a certain position of the subsoil there is a body with different physical properties compared to the surrounding material, when the measuring instrument passes in correspondence with the body, the measured value tends to deviate from the unperturbed value, and the observed physical field assumes a value, defined as anomalous, i.e. a variation with respect to the reference value relative to an homogeneous situation (anomaly).
Since each EM method is sensitive to the contrast of particular physical parameters (electrical conductivity, relative dielectric constant, etc.) of the object under investigation with respect to the surrounding environment, it is understandable that the greater or lesser effectiveness of the one with respect to the other depends on the extent of the contrast of the corresponding physical parameters. Therefore, the choice of the most suitable EM methods for a particular problem is strongly dependent on the objective and is essentially guided by the identification of the physical parameters of the object to be identified that present the greatest contrast with the host environment, and therefore they allow greater ease of detection, as well as considerations of an economic and logistical nature.
EM methods are often used in combination. Thus, for example, the search for illegal landfill takes place at an early stage with the use of GPR and FDEM methods. The ambiguities resulting from the results of a single method can be removed by considering the results obtained by using a second method. For example, the reflections in a GPR survey due to the presence of a wall or a buried pipe could be similar (a hyperbole shaped reflection). By integrating the GPR survey with another EM survey, this ambiguity can be solved considering that relatively low conductivity values could be associated with the wall, while relatively high conductivity value could be associated to the buried pipe.
It is important to stress that, although an interpretation of the results of the, here described, EM methods requires relatively advanced mathematical treatments, initial information, as will be shown in the book, can be obtained from the simple observation of the acquired data.
More in general, the methodological characteristics of the EM techniques, leads to a number of advantages, as it follows:
As for any geophysical technique, also EM methods shows some limitations:
Some of the fields of applications allowing for the intrinsic properties of the EM to be enhanced along with their expected final results, are:
Obviously, this is only a partial list of the potential application of the EM methods and may not be considerate complete; each geophysical measurement campaign should be designed and planned to take into account criteria strictly project specific and target oriented.
Throughout the book, an in‐depth view into the theory and application of four Electromagnetic geophysical techniques known as Ground Penetrating Radar (GPR), Frequency Domain Electromagnetic (FDEM), Time Domain Electromagnetic (TDEM) and Airbone Electromagnetic (AEM) shall be given. Also, each technique shall be considered in its general aspects related to economical, planning, and logistic aspects that are an integral part of the deploying activity on site.
As a further aspect that we attempt highlighting in this book, is that the output of each technique should/could be considered also in terms of its potential integration with the output of other source of information, collected either below the ground and above the ground, in a further effort of digitizing the global information describing the whole surrounding, in a common point cloud containing much information of a different nature, and for potentially different applications and use. This general concept takes place in what is nowadays known as Smart‐Cities, where many sources of information are collected by many sensors, analyzed together, and made available to stakeholders for the optimization, maintenance, and use of assets being part of a urban or industrial context.
More than 25 years of professional experience, collected in over 40 Countries world‐wide, for academic, research, professional, and industrial purposes, results in this manuscript that rather then enter into the deep details, aims at describing the optimal use of a limited number of geophysical techniques and its implementation to several application, demonstrating their flexibility.
The authors are grateful and wish to offer thanks for their support, comments, suggestion, review, to:
Lara De Giorgi, Ivan Ferrari and Francesco Giuri, Institute of Heritage Science (National Research Council of Italy).
Alberto Bicci, President of IDS GeoRadar s.r.l. Part of Hexagon.
Vincenzo Sapia, Istituto Nazionale di Geofisica e Vulcanologia (RU Applied Geophysical Measurements Laboratory, Italy).
Andrea Viezzoli and Antonio Menghini, Aarhus Geofisica s.r.l.
Prof. Enzo Rizzo, University of Ferrara (Italy).
The framework of the following pages is structured into three sections. In the first section, the theoretical basis on which the GPR, FDEM, TDEM, and AEM techniques are founded, shall be illustrated without entering into the very deep physical and mathematical aspects, which are beyond the purposes of this text. However, the theoretical aspects shall be treated with a detail allowing the Reader to have a sufficient familiarity with those features that makes the methods themselves particularly suitable for specific applications. This will also allow the reader to comprehend how the EM instruments are built by the manufacturer, worldwide. This specific aspect is treated in the second section, where the system’s hardware architecture is illustrated, as well as showing how the instrumentation is designed and manufactured with the aim of maximizing the capability to detect the variation of physical properties of the subsoil, down to a given depth.