reading

Acquisitions Editor: Jody Lefevere
Development Editor: Gary Schwartz
Technical Editor: Richard Hawley
Production Editor: Rebecca Anderson
Copy Editor: Judy Flynn
Editorial Manager: Mary Beth Wakefield
Production Manager: Kathleen Wisor
Executive Editor: Jim Minatel
Book Designers: Maureen Forys, Happenstance Type-O-Rama; Judy Fung
Proofreader: Kim Wimpsett
Indexer: Ted Laux
Project Coordinator, Cover: Brent Savage
Cover Designer: Wiley
Cover Image: ©Wilfried Krecichwost/Getty Images

ISBN: 978-1-119-38679-7
ISBN: 978-1-119-41420-9 (ebk.)
ISBN: 978-1-119-41425-4 (ebk.)

Manufactured in the United States of America

No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning or otherwise, except as permitted under Sections 107 or 108 of the 1976 United States Copyright Act, without either the prior written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, (978) 750-8400, fax (978) 646-8600. Requests to the Publisher for permission should be addressed to the Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, (201) 748-6011, fax (201) 748-60 08, or online at http://www.wiley.com/go/permissions.

Limit of Liability/Disclaimer of Warranty: The publisher and the author make no representations or warranties with respect to the accuracy or completeness of the contents of this work and specifically disclaim all warranties, including without limitation warranties of fitness for a particular purpose. No warranty may be created or extended by sales or promotional materials. The advice and strategies contained herein may not be suitable for every situation. This work is sold with the understanding that the publisher is not engaged in rendering legal, accounting, or other professional services. If professional assistance is required, the services of a competent professional person should be sought. Neither the publisher nor the author shall be liable for damages arising herefrom. The fact that an organization or Web site is referred to in this work as a citation and/or a potential source of further information does not mean that the author or the publisher endorses the information the organization or Web site may provide or recommendations it may make. Further, readers should be aware that Internet Web sites listed in this work may have changed or disappeared between when this work was written and when it is read.

For general information on our other products and services or to obtain technical support, please contact our Customer Care Department within the U.S. at (877) 762-2974, outside the U.S. at (317) 572-3993 or fax (317) 572-4002.

Wiley publishes in a variety of print and electronic formats and by print-on-demand. Some material included with standard print versions of this book may not be included in e-books or in print-on-demand. If this book refers to media such as a CD or DVD that is not included in the version you purchased, you may download this material at http://booksupport.wiley.com. For more information about Wiley products, visit www.wiley.com.

Library of Congress Control Number: 2017936607

TRADEMARKS: Wiley, the Wiley logo, and the Sybex logo are trademarks or registered trademarks of John Wiley & Sons, Inc. and/or its affiliates, in the United States and other countries, and may not be used without written permission. AutoCAD and AutoCAD LT are registered trademarks of Autodesk, Inc. All other trademarks are the property of their respective owners. John Wiley & Sons, Inc. is not associated with any product or vendor mentioned in this book.

10 9 8 7 6 5 4 3 2 1

Many talented and hardworking people gave their best effort to produce Mastering AutoCAD 2018 and AutoCAD LT 2018. I offer my sincerest gratitude to those individuals who helped bring this book to you.

Heartfelt thanks go out to the editorial and production teams at Sybex for their efforts. Mary Beth Wakefield managed the project and helped us make all the right connections. Jody Lefevere made sure things got off to a great start and provided support from beginning to end. Gary Schwartz skillfully managed the development process. Richard Hawley did an excellent technical editing job and offered many great suggestions. On the production side, Rebecca Anderson kept the production end of things running smoothly, and Judy Flynn made sure that I wasn’t trying out new uses of the English language.

Thanks also go to Denis Cadu, who has always given his support to our efforts over many projects. Jim Quanci always gives his generous and thoughtful assistance to us author types. Thanks to Elinor Actipis for providing help with general Autodesk matters. Finally, thanks go to Alison Keller, Daniel Kuhman, and KB Lee of the AutoCAD Customer Counsel and the AutoCAD team for generously allowing us to have a look at the prerelease software.

And a great big thank you to my family and friends, who have been there for me through thick and thin.

Contents

Cover

Title Page

Dedication

Acknowledgments

About the Authors

Contents

Introduction

Part 1 • The Basics

Chapter 1 • Exploring the Interface
1. Taking a Guided Tour
  1. Launching AutoCAD
  2. The AutoCAD Window
  3. Using the Application Menu
  4. Using the Ribbon
  5. Picking Points in the Drawing Area
  6. Using the UCS Icon
  7. Working in the Command Window
2. Working with AutoCAD
  1. Opening an Existing File
  2. Getting a Closer Look
  3. Saving a File as You Work
  4. Making Changes
  5. Working with Multiple Files
  6. Adding a Predrawn Symbol with the Tool Palettes
3. The Bottom Line
Chapter 2 • Creating Your First Drawing
1. Getting to Know the Home Tab’s Draw and Modify Panels
2. Starting Your First Drawing
3. Specifying Exact Distances with Coordinates
  1. Specifying Polar Coordinates
  2. Specifying Relative Cartesian Coordinates
4. Interpreting the Cursor Modes and Understanding Prompts
  1. Understanding Cursor Modes
  2. Choosing Command Options
5. Selecting Objects
  1. Selecting Objects in AutoCAD
  2. Providing Base Points
  3. Using Noun/Verb Selection
6. Editing with Grips
  1. Stretching Lines by Using Grips
  2. Moving and Rotating with Grips
7. Understanding Dynamic Input
8. Displaying Data in a Text Window
9. Displaying the Properties of an Object
10. Getting Help
  1. Using the InfoCenter
  2. Finding Additional Sources of Help
11. The Bottom Line
Chapter 3 • Setting Up and Using the Drafting Tools
1. Setting Up a Work Area
  1. Specifying Units
  2. Fine-Tuning the Measurement System
  3. Setting Up the Drawing Limits
  4. Looking at an Alternative to Limits
  5. Understanding Scale Factors
  6. Using Polar Tracking
  7. Setting the Polar Tracking Angle
2. Exploring the Drawing Process
  1. Locating an Object in Reference to Others
  2. Getting a Closer Look
  3. Modifying an Object
3. Planning and Laying Out a Drawing
  1. Making a Preliminary Sketch
  2. Using the Layout
  3. Erasing the Layout Lines
  4. Putting on the Finishing Touches
  5. Aligning Objects by Using Object Snap Tracking
4. Using the AutoCAD Modes as Drafting Tools
  1. Using Grid Mode as a Background Grid
  2. Using Snap Modes
5. The Bottom Line
Chapter 4 • Organizing Objects with Blocks and Groups
1. Creating and Using a Symbol
  1. Understanding the Block Definition Dialog Box
  2. Inserting a Symbol
  3. Scaling and Rotating Blocks
  4. Using an Existing Drawing as a Symbol
2. Modifying a Block
  1. Unblocking and Redefining a Block
  2. Saving a Block as a Drawing File
  3. Replacing Existing Files with Blocks
  4. Understanding the Write Block Dialog Box Options
  5. Other Uses for Blocks
3. Understanding the Annotation Scale
4. Grouping Objects
  1. Modifying Members of a Group
  2. Ungrouping, Adding, and Subtracting from a Group
  3. Working with the Object Grouping Dialog Box
  4. Working with the AutoCAD LT Group Manager
5. The Bottom Line
Chapter 5 • Keeping Track of Layers and Blocks
1. Organizing Information with Layers
  1. Creating and Assigning Layers
  2. Working on Layers
  3. Controlling Layer Visibility
  4. Finding the Layers You Want
  5. Taming an Unwieldy List of Layers
  6. Assigning Linetypes to Layers
  7. Adding a Linetype to a Drawing
  8. Controlling Lineweights
2. Keeping Track of Blocks and Layers
  1. Getting a Text File List of Layers or Blocks
3. The Bottom Line

Part 2 • Mastering Intermediate Skills

Chapter 6 • Editing and Reusing Data to Work Efficiently
1. Creating and Using Templates
  1. Creating a Template
  2. Using a Template
2. Copying an Object Multiple Times
  1. Making Circular Copies
  2. Making Row and Column Copies
  3. Fine-Tuning Your View
  4. Finishing the Kitchenette
  5. Array Along a Path
  6. Making Changes to an Associative Array
3. Developing Your Drawing
  1. Importing Settings
  2. Using Osnap Tracking to Place Objects
4. Finding an Exact Distance Along a Curve
5. Changing the Length of Objects
6. Creating a New Drawing by Using Parts from Another Drawing
  1. Eliminating Unused Blocks, Layers, Linetypes, Shapes, Styles, and More
7. The Bottom Line
Chapter 7 • Mastering Viewing Tools, Hatches, and External References
1. Assembling the Parts
2. Taking Control of the AutoCAD Display
  1. Understanding Regeneration and Redrawing
  2. Saving Views
  3. Understanding the Frozen Layer Option
3. Using Hatch Patterns in Your Drawings
  1. Placing a Hatch Pattern in a Specific Area
  2. Adding Predefined Hatch Patterns
  3. Positioning Hatch Patterns Accurately
  4. Updating a Block from an External File
  5. Changing the Hatch Area
  6. Modifying a Hatch Pattern
4. Understanding the Boundary Hatch Options
  1. Controlling Boundaries with the Boundaries Panel
  2. Fine-Tuning the Boundary Behavior
  3. Controlling Hatch Behavior with the Options Panel
  4. Controlling Hatch Default Layer, Layout Scale, and ISO Line Weight
  5. Using Additional Hatch Features
  6. Using Gradient Shading
  7. Tips for Using Hatch
  8. Space Planning and Hatch Patterns
5. Using External References
  1. Attaching a Drawing as an External Reference
  2. Other Differences Between External References and Blocks
  3. Other External Reference Options
  4. Clipping Xref Views and Improving Performance
6. Editing Xrefs in Place
  1. Using the External Reference Tab
  2. Adding and Removing Objects from Blocks and Xrefs
  3. Understanding the Reference Edit Dialog Box Options
7. The Bottom Line
Chapter 8 • Introducing Printing, Plotting, and Layouts
1. Plotting the Plan
2. Understanding the Plotter Settings
  1. Paper Size
  2. Drawing Orientation
  3. Plot Area
  4. Plot Scale
  5. Shaded Viewport Options
  6. Plot Offset
  7. Plot Options
  8. Exit Options
3. Plotting Using Layout Views
  1. Setting Plot Scale in the Layout Viewports
4. Adding an Output Device
  1. Editing a Plotter Configuration
5. Storing a Page Setup
6. Using Electronic Plots
  1. Exporting to PDF Through the Plot Dialog Box
  2. Exporting to PDF Through the Export To DWF/PDF Ribbon Panel
  3. Exporting Autodesk DWF and DWFx Files
7. The Bottom Line
Chapter 9 • Adding Text to Drawings
1. Preparing a Drawing for Text
  1. Organizing Text by Styles
  2. Getting Familiar with the Text and Annotation Scale Control Panels
2. Setting the Annotation Scale and Adding Text
  1. Inserting Text
  2. Exploring Text and Scale
3. Understanding the Text Style Dialog Box Options
  1. Styles
  2. Set Current/New/Delete
  3. Font
  4. Size
  5. Effects
4. Exploring Text Formatting in AutoCAD
  1. Adjusting the Text Height and Font
  2. Understanding the Text Editor Tab
  3. Adding Symbols and Special Characters
  4. Setting Indents and Tabs
5. What Do the Fonts Look Like?
6. Adding Simple Single-Line Text Objects
  1. Justifying Single-Line Text Objects
  2. Using Special Characters with Single-Line Text Objects
7. Using the Check Spelling Feature
  1. How Check Spelling Works
  2. Choosing a Dictionary
8. Substituting Fonts
9. Finding and Replacing Text
10. The Bottom Line
Chapter 10 • Using Fields and Tables
1. Using Fields to Associate Text with Drawing Properties
2. Adding Tables to Your Drawing
  1. Creating a Table
  2. Adding Cell Text
  3. Adjusting Table Text Orientation and Location
3. Editing the Table Line Work
4. Adding Formulas to Cells
  1. Using Formulas Directly in Cells
  2. Using Other Math Operations
5. Importing and Exporting Tables
  1. Importing a Table
  2. Exporting Tables
6. Creating Table Styles
  1. Adding or Modifying a Table Style
  2. The Table Style Options
7. The Bottom Line
Chapter 11 • Using Dimensions
1. Understanding the Components of a Dimension
2. Creating a Dimension Style
  1. Setting Up the Primary Unit Style
  2. Setting the Height for Dimension Text
  3. Setting the Location and Orientation of Dimension Text
  4. Choosing an Arrow Style and Setting the Dimension Scale
  5. Setting Up Alternate Units
  6. Setting the Current Dimension Style
  7. Modifying a Dimension Style
3. Drawing Linear Dimensions
  1. Understanding the Dimensions Panel
  2. Placing Horizontal and Vertical Dimensions
  3. Continuing a Dimension
  4. Drawing Dimensions from a Common Base Extension Line
  5. Adjusting the Distance Between Dimensions
4. Editing Dimensions
  1. Appending Data to Dimension Text
  2. Using Grips to Make Minor Adjustments to Dimensions
  3. Changing Style Settings of Individual Dimensions
  4. Editing Dimensions and Other Objects Together
  5. Associating Dimensions with Objects
  6. Adding a String of Dimensions with a Single Operation
  7. Adding or Removing the Alternate Dimensions
5. Dimensioning Nonorthogonal Objects
  1. Dimensioning Nonorthogonal Linear Distances
  2. Dimensioning Radii, Diameters, and Arcs
  3. Skewing Dimension Lines
6. Using the Dimension Tool
7. Adding a Note with a Leader Arrow
  1. Creating Multileader Styles
  2. Editing Multileader Notes
  3. Breaking a Dimension Line for a Leader
8. Applying Ordinate Dimensions
9. Adding Tolerance Notation
  1. Inserting Tolerance and Datum Values
  2. Adding Inspection Dimensions
10. The Bottom Line

Part 3 • Mastering Advanced Skills

Chapter 12 • Using Attributes
1. Creating Attributes
  1. Adding Attributes to Blocks
  2. Copying and Editing Attribute Definitions
  3. Turning the Attribute Definitions into a Block
  4. Inserting Blocks Containing Attributes
2. Editing Attributes
  1. Editing Attribute Values One at a Time
  2. Editing Attribute Text Formats and Properties
  3. Making Global Changes to Attribute Values
  4. Making Invisible Attributes Visible
  5. Making Global Format and Property Changes to Attributes
  6. Other Block Attribute Manager Options
  7. Redefining Blocks Containing Attributes
3. Extracting and Exporting Attribute Information
  1. Performing the Extraction
  2. Extracting Attribute Data to an AutoCAD Table
4. The Bottom Line
Chapter 13 • Copying Existing Drawings from Other Sources
1. Methods for Converting Paper Drawings to AutoCAD Files
2. Importing a Raster Image
3. Working with a Raster Image
  1. Scaling a Raster Image
  2. Controlling Object Visibility and Overlap with Raster Images
  3. Adjusting Brightness, Contrast, and Fade
  4. Clipping a Raster Image
  5. Turning Off the Frame, Adjusting Overall Quality, and Controlling Transparency
4. Working with PDF Files
  1. Importing a PDF
  2. Scaling and Osnaps with PDFs
  3. Controlling the PDF Display
  4. Importing a PDF as an AutoCAD Drawing
  5. Reconstructing Imported AutoCAD SHX Fonts
5. Coordinating Geographic Locations
  1. Making Adjustments to the Map
  2. Finding Measurements and Distances
6. The Bottom Line
Chapter 14 • Advanced Editing and Organizing
1. Using External References
  1. Preparing Existing Drawings for External Referencing
  2. Assembling Xrefs to Build a Drawing
  3. Updating Blocks in Xrefs
  4. Importing Named Elements from Xrefs
  5. Controlling the Xref Search Path
2. Managing Layers
  1. Saving and Recalling Layer Settings
  2. Other Tools for Managing Layers
3. Using Advanced Tools: Filter and Quick Select
  1. Filtering Selections
  2. Using Quick Select
4. Using the QuickCalc Calculator
  1. Adding Foot and Inch Lengths and Finding the Sum of Angles
  2. Converting Units with QuickCalc
  3. Using QuickCalc to Find Points
  4. Finding Fractional Distances between Two Points
  5. Using QuickCalc While in the Middle of a Command
  6. Storing Expressions and Values
  7. Guidelines for Working with QuickCalc
5. The Bottom Line
Chapter 15 • Laying Out Your Printer Output
1. Understanding Model Space and Paper Space
  1. Switching from Model Space to Paper Space
  2. Setting the Size of a Paper Space Layout
  3. Creating New Paper Space Viewports
  4. Reaching Inside Viewports
2. Working with Paper Space Viewports
  1. Scaling Views in Paper Space
  2. Setting Layers in Individual Viewports
  3. Creating and Using Multiple Paper Space Layouts
3. Creating Odd-Shaped Viewports
4. Understanding Lineweights, Linetypes, and Dimensions in Paper Space
  1. Controlling and Viewing Lineweights in Paper Space
  2. The Lineweight Settings Dialog Box
  3. Linetype Scales and Paper Space
  4. Dimensioning in Paper Space Layouts
  5. Other Uses for Paper Space
5. The Bottom Line
Chapter 16 • Making “Smart” Drawings with Parametric Tools
1. Why Use Parametric Drawing Tools?
2. Connecting Objects with Geometric Constraints
  1. Using AutoConstrain to Add Constraints Automatically
  2. Editing a Drawing Containing Constraints
  3. Using Other Geometric Constraints
  4. Using Constraints in the Drawing Process
3. Controlling Sizes with Dimensional Constraints
  1. Adding a Dimensional Constraint
  2. Editing a Dimensional Constraint
4. Using Formulas to Control and Link Dimensions
  1. Adding a Formula Parameter
  2. Testing the Formula
  3. Using Other Formulas
5. Editing the Constraint Options
6. Putting Constraints to Use
7. The Bottom Line
Chapter 17 • Using Dynamic Blocks
1. Exploring the Block Editor
  1. Opening the Block Editor
  2. Editing a Block and Creating New Blocks
2. Creating a Dynamic Block
  1. Adding a Parameter
  2. Adding an Action
  3. Adding an Increment Value
  4. Editing Parameters and Actions
  5. Keeping an Object Centered
3. Using Constraints in Dynamic Blocks
4. Adding a List of Predefined Options
5. Creating Multiple Shapes in One Block
6. Rotating Objects in Unison
7. Filling in a Space Automatically with Objects
8. Including Block Information with Data Extraction
9. The Bottom Line
Chapter 18 • Drawing Curves
1. Introducing Polylines
  1. Drawing a Polyline
  2. Setting Polyline Options
2. Editing Polylines
  1. Setting Pedit Options
  2. Smoothing Polylines
  3. Editing Vertices
3. Creating a Polyline Spline Curve
4. Using True Spline Curves
  1. Drawing a True Spline
  2. Understanding the Spline Options
  3. Fine-Tuning Spline Curves
5. Marking Divisions on Curves
  1. Dividing Objects into Segments of Equal Length
  2. Dividing Objects into Specified Lengths
6. The Bottom Line
Chapter 19 • Getting and Exchanging Data from Drawings
1. Finding the Area of Closed Boundaries
  1. Finding the Area of an Object
  2. Using Hatch Patterns to Find Areas
  3. Adding and Subtracting Areas with the Area Command
2. Getting General Information
  1. Determining the Drawing’s Status
  2. Keeping Track of Time
  3. Getting Information from System Variables
  4. Keeping a Log of Your Activity
  5. Capturing and Saving Text Data from the AutoCAD Text Window
  6. Understanding the Command Window Context Menu
  7. Storing Searchable Information in AutoCAD Files
  8. Searching for AutoCAD Files
  9. Recovering Corrupted Files
3. Using the DXF File Format to Exchange CAD Data with Other Programs
  1. Exporting DXF Files
  2. Opening or Importing DXF Files
4. Using AutoCAD Drawings in Page Layout Programs
  1. Exporting Raster Files
  2. Exporting Vector Files
5. Using OLE to Import Data
  1. Editing OLE Links
  2. Importing Worksheets as AutoCAD Tables
  3. Understanding Options for Embedding Data
  4. Using the Clipboard to Export AutoCAD Drawings
6. The Bottom Line

Part 4 • 3D Modeling and Imaging

Chapter 20 • Creating 3D Drawings
1. Getting to Know the 3D Modeling Workspace
2. Drawing in 3D Using Solids
  1. Adjusting Appearances
  2. Creating a 3D Box
  3. Editing 3D Solids with Grips
  4. Constraining Motion with the Gizmo
  5. Rotating Objects in 3D Using Dynamic UCS
  6. Drawing on a 3D Object’s Surface
  7. Pushing and Pulling Shapes from a Solid
  8. Making Changes to Your Solid
3. Creating 3D Forms from 2D Shapes
4. Isolating Coordinates with Point Filters
5. Moving Around Your Model
  1. Finding Isometric and Orthogonal Views
  2. Rotating Freely Around Your Model
  3. Changing Your View Direction
  4. Using SteeringWheels
  5. Changing Where You Are Looking
  6. Flying through Your View
  7. Changing from Perspective to Parallel Projection
6. Getting a Visual Effect
  1. Using Visual Styles
  2. Creating a Sketched Look with Visual Styles
  3. In-Canvas Viewport Controls
7. Turning a 3D View into a 2D AutoCAD Drawing
8. Using the Point Cloud Feature
9. The Bottom Line
Chapter 21 • Using Advanced 3D Features
1. Setting Up AutoCAD for this Chapter
2. Mastering the User Coordinate System
  1. Defining a UCS
  2. Saving a UCS
  3. Working in a UCS
  4. Building 3D Parts in Separate Files
3. Understanding the UCS Options
  1. UCS Based on Object Orientation
  2. UCS Based on Offset Orientation
  3. UCS Rotated Around an Axis
  4. Orienting a UCS in the View Plane
  5. Manipulating the UCS Icon
  6. Saving a UCS with a View
4. Using Viewports to Aid in 3D Drawing
5. Using the Array Tools
  1. Making Changes to an Associative Array
6. Creating Complex 3D Surfaces
  1. Laying Out a 3D Form
  2. Spherical and Cylindrical Coordinate Formats
  3. Using a 3D Polyline
  4. Creating a Curved 3D Surface
  5. Converting the Surface into a Solid
  6. Shaping the Solid
  7. Finding the Interference between Two Solids
  8. Creating Tubes with the Sweep Tool
  9. Using Sweep to Create Complex Forms
7. Creating Spiral Forms
8. Creating Surface Models
  1. Slicing a Solid with a Surface
  2. Finding the Volume of a Cut
  3. Understanding the Loft Command
9. Moving Objects in 3D Space
  1. Aligning Objects in 3D Space
  2. Moving an Object in 3D
  3. Rotating an Object in 3D
10. The Bottom Line
Chapter 22 • Editing and Visualizing 3D Solids
1. Understanding Solid Modeling
2. Creating Solid Forms
  1. Joining Primitives
  2. Cutting Portions Out of a Solid
3. Creating Complex Solids
  1. Tapering an Extrusion
  2. Sweeping a Shape on a Curved Path
  3. Revolving a Polyline
4. Editing Solids
  1. Splitting a Solid into Two Pieces
  2. Rounding Corners with the Fillet Tool
  3. Chamfering Corners with the Chamfer Tool
  4. Using the Solid-Editing Tools
5. Streamlining the 2D Drawing Process
  1. Drawing Standard Top, Front, and Right-Side Views
  2. Creating 2D Drawings with the Base View Command
  3. Adding Dimensions and Notes in a Layout
  4. Using Visual Styles with a Viewport
6. Visualizing Solids
7. The Bottom Line
Chapter 23 • Exploring 3D Mesh and Surface Modeling
1. Creating a Simple 3D Mesh
  1. Creating a Mesh Primitive
  2. Understanding the Parts of a Mesh
  3. Smoothing a Mesh
2. Editing Faces and Edges
  1. Stretching Faces
  2. Moving an Edge
  3. Adding More Faces
  4. Rotating an Edge
  5. Adding a Crease
  6. Splitting and Extruding a Mesh Face
3. Creating Mesh Surfaces
  1. Revolved Surface
  2. Edge Surface
  3. Ruled Surface
  4. Tabulated Surface
4. Converting Meshes to Solids
5. Understanding 3D Surfaces
6. Editing Surfaces
  1. Using Extrude, Surface Trim, and Surface Fillet
  2. Using Surface Blend, Patch, and Offset
  3. Understanding Associativity
  4. Editing with Control Vertices
  5. Editing with the CV Edit Bar
  6. Making Holes in a Surface with the Project Geometry Panel
  7. Visualizing Curvature: Understanding the Analysis Panel
7. The Bottom Line

Part 5 • Customization and Integration

Chapter 24 • Customizing Toolbars, Menus, Linetypes, and Hatch Patterns
1. Using Workspaces
2. Customizing the User Interface
  1. Taking a Quick Customization Tour
  2. Understanding the Customizations In All Files Panel
  3. Getting the Overall View
  4. Finding Commands in the Command List
  5. Opening Preview, Button Image, and Shortcuts
  6. Getting to the Core of Customization in the Properties Group
  7. Creating Your Own Ribbon Panels and Menus
  8. Customizing Ribbon Panel Tools
3. Creating Macros in Tools and Menus
  1. Pausing for User Input
  2. Opening an Expanded Text Box for the Macro Option
4. Editing Keyboard Shortcuts
5. Saving, Loading, and Unloading Your Customizations
6. Understanding the DIESEL Macro Language
  1. Using DIESEL at the Command Line
  2. Using DIESEL in a Custom Menu Macro
  3. Using DIESEL as a Menu Bar Option Label
  4. Using DIESEL and Fields to Generate Text
7. Creating Custom Linetypes
  1. Viewing Available Linetypes
  2. Creating a New Linetype
  3. Understanding the Linetype Code
  4. Creating Complex Linetypes
8. Creating Hatch Patterns
9. The Bottom Line
Chapter 25 • Managing and Sharing Your Drawings
1. Sharing Drawings Online
  1. Sharing Project Files with eTransmit
  2. Protecting AutoCAD Drawing Files
2. Publishing Your Drawings
  1. Exchanging Drawing Sets
  2. Exploring Other Publish Options
  3. Creating a PDF or DWF File by Using the Plot Dialog Box
3. Sharing Files with A360 Drive
  1. Getting Started with A360 Drive
  2. Viewing Files and Adding Comments
  3. Sharing Files
  4. Opening and Saving Files Directly to A360 Drive
  5. Collaborating with Others Using Design Feed
4. Adding Hyperlinks to Drawings
  1. Creating Hyperlinks
  2. Editing and Deleting Hyperlinks
  3. Taking a Closer Look at the Hyperlink Options
5. Managing Your Drawings with DesignCenter and the Tool Palettes
  1. Getting Familiar with DesignCenter
  2. Opening and Inserting Files with DesignCenter
  3. Finding and Extracting the Contents of a Drawing
  4. Exchanging Data between Open Files
  5. Loading Specific Files into DesignCenter
  6. Customizing the Tool Palettes with DesignCenter
6. Establishing Office Standards
  1. Establishing Layering and Text Conventions
  2. Checking Office Standards
7. Converting Multiple Layer Settings
  1. Exploring Other Layer Translator Options
8. The Bottom Line

Part 6 • Appendixes

Appendix A • The Bottom Line
1. Chapter 1: Exploring the Interface
2. Chapter 2: Creating Your First Drawing
3. Chapter 3: Setting Up and Using the Drafting Tools
4. Chapter 4: Organizing Objects with Blocks and Groups
5. Chapter 5: Keeping Track of Layers and Blocks
6. Chapter 6: Editing and Reusing Data to Work Efficiently
7. Chapter 7: Mastering Viewing Tools, Hatches, and External References
8. Chapter 8: Introducing Printing, Plotting, and Layouts
9. Chapter 9: Adding Text to Drawings
10. Chapter 10: Using Fields and Tables
11. Chapter 11: Using Dimensions
12. Chapter 12: Using Attributes
13. Chapter 13: Copying Existing Drawings from Other Sources
14. Chapter 14: Advanced Editing and Organizing
15. Chapter 15: Laying Out Your Printer Output
16. Chapter 16: Making “Smart” Drawings with Parametric Tools
17. Chapter 17: Using Dynamic Blocks
18. Chapter 18: Drawing Curves
19. Chapter 19: Getting and Exchanging Data from Drawings
20. Chapter 20: Creating 3D Drawings
21. Chapter 21: Using Advanced 3D Features
22. Chapter 22: Editing and Visualizing 3D Solids
23. Chapter 23: Exploring 3D Mesh and Surface Modeling
24. Chapter 24: Customizing Toolbars, Menus, Linetypes, and Hatch Patterns
25. Chapter 25: Managing and Sharing Your Drawings
Appendix B • Installing and Setting Up AutoCAD
1. Before Installing AutoCAD
2. Proceeding with the Installation
3. Configuring AutoCAD
  1. The Files Tab
  2. The Display Tab
  3. The Open And Save Tab
  4. The Plot and Publish Tab
  5. The System Tab
  6. The User Preferences Tab
  7. The Drafting Tab
  8. The 3D Modeling Tab
  9. The Selection Tab
  10. The Profiles Tab
  11. The Online Tab
4. Configuring the Tablet Menu Area
5. Turning On the Noun/Verb Selection Method
6. Turning on the Grips Feature
7. Setting Up the Tracking Vector Feature
8. Adjusting the AutoCAD 3D Graphics System
9. Finding Folders That Contain AutoCAD Files
10. Setting Up AutoCAD with a White Background
Appendix C • The Autodesk AutoCAD 2018 Certification

Index

Eula

Mastering

AutoCAD^® 2018 and
AutoCAD LT^® 2018

George Omura

with Brian C. Benton