Details

Petroleum Refining Design and Applications Handbook, Volume 1


Petroleum Refining Design and Applications Handbook, Volume 1


1. Aufl.

von: A. Kayode Coker

257,99 €

Verlag: Wiley
Format: PDF
Veröffentl.: 31.07.2018
ISBN/EAN: 9781119257097
Sprache: englisch
Anzahl Seiten: 654

DRM-geschütztes eBook, Sie benötigen z.B. Adobe Digital Editions und eine Adobe ID zum Lesen.

Beschreibungen

<p>There is a renaissance that is occurring in chemical and process engineering, and it is crucial for today's scientists, engineers, technicians, and operators to stay current. With so many changes over the last few decades in equipment and processes, petroleum refining is almost a living document, constantly needing updating. With no new refineries being built, companies are spending their capital re-tooling and adding on to existing plants. Refineries are like small cities, today, as they grow bigger and bigger and more and more complex. A huge percentage of a refinery can be changed, literally, from year to year, to account for the type of crude being refined or to integrate new equipment or processes.</p> <p>This book is the most up-to-date and comprehensive coverage of the most significant and recent changes to petroleum refining, presenting the state-of-the-art to the engineer, scientist, or student. Useful as a textbook, this is also an excellent, handy go-to reference for the veteran engineer, a volume no chemical or process engineering library should be without. Written by one of the world's foremost authorities, this book sets the standard for the industry and is an integral part of the petroleum refining renaissance. It is truly a must-have for any practicing engineer or student in this area.</p>
<p>Preface xix</p> <p>Acknowledgments xxi</p> <p>About the Author xxiii</p> <p><b>1 Introduction 1</b></p> <p>References 6</p> <p><b>2 Composition of Crude Oils and Petroleum Products 7 </b></p> <p>2.1 Hydrocarbons 8</p> <p>2.1.1 Alkynes Series 12</p> <p>2.2 Aromatic Hydrocarbons 14</p> <p>2.3 Heteroatomic Organic Compounds 15</p> <p>2.3.1 Non-Hydrocarbons 15</p> <p>2.3.2 Sulfur Compounds 18</p> <p>2.4 Thiols 18</p> <p>2.5 Oxygen Compounds 20</p> <p>2.6 Nitrogen Compounds 22</p> <p>2.7 Resins and Asphaltenes 23</p> <p>2.8 Salts 24</p> <p>2.9 Carbon Dioxide 24</p> <p>2.10 Metallic Compounds 24</p> <p>2.11 Products Composition 25</p> <p>2.11.1 Liquefied Petroleum Gas (LPG) (C<sub>3</sub> and C<sub>4</sub>) 26</p> <p>2.11.2 Gasoline (C<sub>5</sub> to C<sub>11</sub>) 26</p> <p>2.11.3 Condensate (C<sub>4</sub>, C<sub>5</sub> and C<sub>6</sub> >) 27</p> <p>2.11.4 Gas Fuel Oils (C<sub>12</sub> to C<sub>19</sub>) 27</p> <p>2.11.5 Kerosene 27</p> <p>2.11.6 Diesel Fuel 28</p> <p>2.11.7 Fuel Oils # 4, 5, and 6 28</p> <p>2.11.8 Residual Fuel Oil 28</p> <p>2.11.9 Natural Gas 29</p> <p>References 30</p> <p><b>3 Characterization of Petroleum and Petroleum Fractions 31</b></p> <p>3.1 Introduction 31</p> <p>3.1.1 Crude Oil Properties 32</p> <p>3.1.2 Gravity, API 32</p> <p>3.1.3 Boiling Point Range 33</p> <p>3.1.4 Characterization Factor 33</p> <p>3.1.5 The Universal Oil Product Characterization factor, K<sub>UOP</sub> 34</p> <p>3.1.6 Carbon Residue, wt% 34</p> <p>3.1.7 Nitrogen Content, wt% 36</p> <p>3.1.8 Sulfur Content, wt% 36</p> <p>3.1.9 Total Acid Number (TAN) 36</p> <p>3.1.10 Salt Content, pounds/1000 barrels 36</p> <p>3.1.11 Metals, parts/million (ppm) by weight 36</p> <p>3.1.12 Pour Point (<sup>o</sup>F or <sup>°</sup>C) 36</p> <p>3.2 Crude Oil Assay Data 37</p> <p>3.2.1 Whole crude oil average properties 37</p> <p>3.2.2 Fractional properties 37</p> <p>3.3 Crude Cutting Analysis 37</p> <p>3.4 Crude Oil Blending 37</p> <p>3.5 Laboratory Testing of Crude Oils 46</p> <p>3.5.1 True Boiling Point (TBP) Curve 46</p> <p>3.5.2 ASTM D86 Distillation 46</p> <p>3.5.3 Boiling Points 47</p> <p>3.5.4 Conversion Between ASTM and TBP Distillation 49</p> <p>3.5.5 Petroleum Pseudo-Components 54</p> <p>3.5.6 Pseudo-Component Normal Boiling Points 55</p> <p>3.5.7 ASTM D1160 Distillation 55</p> <p>3.5.8 Determination of ASTM IBP, 10%, 20–90% Points of Blend 55</p> <p>3.5.9 ASTM 10–90% Points 56</p> <p>3.5.10 Initial Boiling Point Determination 56</p> <p>3.5.11 ASTM End Point of Blend 56</p> <p>3.5.12 Flash Point 56</p> <p>3.5.13 Flash Point, <sup>°</sup>F, as a Function of Average Boiling Point 57</p> <p>3.5.14 Smoke Point of Kerosenes 57</p> <p>3.5.15 Luminometer Number 57</p> <p>3.5.16 Reid Vapor Pressure (RVP) 57</p> <p>3.5.17 Vapor Pressure of Narrow Hydrocarbon Cuts 58</p> <p>3.6 Octanes 58</p> <p>3.7 Cetanes 58</p> <p>3.7.1 Cetane Index 59</p> <p>3.8 Diesel Index 59</p> <p>3.9 Determination of the Lower Heating Value of Petroleum Fractions 59</p> <p>3.10 Aniline Point Blending 60</p> <p>3.11 Correlation Index (CI) 60</p> <p>3.12 Chromatographically Simulated Distillations 61</p> References 62 <p><b>4 Thermodynamic Properties of Petroleum and Petroleum Fractions 63</b></p> <p>4.1 K-Factor Hydrocarbon Equilibrium Charts 64</p> <p>4.2 Non-Ideal Systems 72</p> <p>4.3 Vapor Pressure 74</p> <p>4.3.1 Vapor Pressure Determination using the Clausius-Clapeyron and the Antoine Equations 75</p> <p>4.4 Viscosity 80</p> <p>4.4.1 Conversion to Saybolt Universal Viscosity 80</p> <p>4.4.2 Conversion to Saybolt Furol Viscosity 82</p> <p>4.4.3 Equivalents of Kinematic (cSt), Saybolt Universal (SUS), and Dynamic viscosity 82</p> <p>4.4.4 Viscosity of Liquid Hydrocarbons 83</p> <p>4.4.5 Gas Viscosity 84</p> <p>4.5 Refractive Index 87</p> <p>4.6 Liquid Density 89</p> <p>4.6.1 Gas Density 89</p> <p>4.7 Molecular Weight 90</p> <p>4.8 Molecular Type Composition 90</p> <p>4.9 Critical Temperature, T<sub>c</sub> 96</p> <p>4.10 Critical Pressure, P<sub>c</sub> 97</p> <p>4.11 Pseudo-Critical Constants and Acentric Factors 98</p> <p>4.12 Enthalpy of Petroleum Fractions 99</p> <p>4.13 Compressibility Z Factor of Natural Gases 100</p> <p>4.14 Simulation Thermodynamic Software Programs 105</p> <p>References 110</p> <p><b>5 Process Descriptions of Refinery Processes 111</b></p> <p>5.1 Introduction 111</p> <p>5.2 Refinery and Distillation Processes 115</p> <p>5.3 Process Description of the Crude Distillation Unit 120</p> <p>5.3.1 Crude Oil Desalting 121</p> <p>5.3.2 Types of Salts in Crude Oil 122</p> <p>5.3.3 Desalting Process 122</p> <p>5.3.4 Pumparound Heat Removal 127</p> <p>5.3.5 Tower Pressure Drop and Flooding 130</p> <p>5.3.6 Carbon Steel Trays 130</p> <p>5.3.7 Rectifying Section of the Main Column 130</p> <p>5.3.8 Side Stripping Columns 130</p> <p>5.3.9 Crude Column Overhead 130</p> <p>5.3.10 General Properties of Petroleum Fractions 130</p> <p>5.4 Process Variables in the Design of Crude Distillation Column 132</p> <p>5.4.1 Process Design of a Crude Distillation Column 133</p> <p>5.5 Process Simulation 134</p> <p>5.5.1 Overall Check of Simulation 135</p> <p>5.5.2 Other Aspects of Design 136</p> <p>5.5.3 Relationship between Actual Trays and Theoretical Trays 137</p> <p>5.6 Process Description of Light Arabian Crude Using UniSim<sup>®</sup> Simulation Software [12] 138</p> <p>5.6.1 Column Conventions 141</p> <p>5.6.2 Performance Specifications Definition 142</p> <p>5.6.3 Cut Points 142</p> <p>5.6.4 Degree of Separation 142</p> <p>5.6.5 Overflash 142</p> <p>5.6.6 Column Pressure 143</p> <p>5.6.7 Overhead Temperature 143</p> <p>5.6.8 Bottom Stripping 144</p> <p>5.6.9 Side Stream Stripper 144</p> <p>5.6.10 Reflux 144</p> <p>5.7 Troubleshooting Actual Columns 144</p> <p>5.8 Health, Safety and Environment Considerations 145</p> <p>References 148</p> <p><b>6 Thermal Cracking Processes 149</b></p> <p>6.1 Process Description 152</p> <p>6.2 Steam Jet Ejector 152</p> <p>6.3 Pressure Survey in a Vacuum Column 154</p> <p>6.4 Simulation of Vacuum Distillation Unit 156</p> <p>6.5 Coking 157</p> <p>6.5.1 Delayed Coking 157</p> <p>6.5.2 Delayed Coker Yield Prediction 161</p> <p>6.5.3 Coke Formation 162</p> <p>6.5.4 Thermodynamics of Coking of Light Hydrocarbons 162</p> <p>6.5.5 Gas Composition 163</p> <p>6.6 Fluid Coking 164</p> <p>6.6.1 Flexi-Coking 165</p> <p>6.6.2 Contact Coking 167</p> <p>6.6.3 Coke Drums 168</p> <p>6.6.4 Heavy Coker Gas Oil (HCGO) Production 170</p> <p>6.6.5 Light Coker Gas Oil (LCGO) Production 170</p> <p>6.7 Fractionator Overhead System 170</p> <p>6.8 Coke Drum Operations 172</p> <p>6.9 Hydraulic Jet Decoking 173</p> <p>6.10 Uses of Petroleum Coke 174</p> <p>6.11 Use of Gasification 174</p> <p>6.12 Sponge Coke 175</p> <p>6.13 Safety and Environmental Considerations 175</p> <p>6.14 Simulation/Calculations 176</p> <p>6.15 Visbreaking 177</p> <p>6.15.1 Visbreaking Reactions 180</p> <p>6.15.2 Visbreaking Severity 180</p> <p>6.15.3 Operation and Control 180</p> <p>6.15.4 Typical Visbreaker Unit 181</p> <p>6.15.5 Typical Visbreaker Unit with Vacuum Flasher 182</p> <p>6.15.6 Typical Combination Visbreaker and Thermal Cracker 183</p> <p>6.15.7 Product Yield 183</p> <p>6.16 Process Simulation 184</p> <p>6.17 Health, Safety and Environment Considerations 185</p> References 186 <p><b>7 Hydroprocessing 187</b></p> <p>7.1 Catalytic Conversion Processes 187</p> <p>7.1.1 Hydrocracking Chemistry 188</p> <p>7.1.2 Hydrocracking Reactions 190</p> <p>7.1.3 Typical Hydrocracking Reactions 191</p> <p>7.2 Feed Specifications 194</p> <p>7.2.1 Space Velocity 195</p> <p>7.2.2 Reactor Temperature 195</p> <p>7.2.3 Reactor Pressure 195</p> <p>7.2.4 Hydrogen Recycle Rate 195</p> <p>7.2.5 Oil Recycle Ratio 195</p> <p>7.2.6 Heavy Polynuclear Aromatics 196</p> <p>7.3 Feed Boiling Range 196</p> <p>7.4 Catalyst 196</p> <p>7.4.1 Catalyst Performance 197</p> <p>7.4.2 Loss of Catalyst Performance 197</p> <p>7.4.3 Poisoning by Impurities in Feeds or Catalysts 198</p> <p>7.4.4 The Apparent Catalyst Activity 200</p> <p>7.5 Poor Gas Distribution 200</p> <p>7.6 Poor Mixing of Reactants 200</p> <p>7.7 The Mechanism of Hydrocracking 200</p> <p>7.8 Thermodynamics and Kinetics of Hydrocracking 201</p> <p>7.9 Process Design, Rating and Performance 204</p> <p>7.9.1 Operating Temperature and Pressure 205</p> <p>7.9.2 Optimum Catalyst Size and Shape 205</p> <p>7.9.3 Pressure Drop (ΔP) in Tubular/Fixed-Bed Reactors 205</p> <p>7.9.4 Catalyst Particle Size 207</p> <p>7.9.5 Vessel Dimensions 208</p> <p>7.10 Increased ΔP 210</p> <p>7.11 Factors Affecting Reaction Rate 214</p> <p>7.12 Measurement of Performance 215</p> <p>7.13 Catalyst-Bed Temperature Profiles 216</p> <p>7.14 Factors Affecting Hydrocracking Process Operation 217</p> <p>7.15 Hydrocracking Correlations 217</p> <p>7.15.1 Maximum Aviation Turbine Kerosene (ATK) Correlations 219</p> <p>7.15.2 Process Description 220</p> <p>7.15.3 Fresh Feed and Recycle Liquid System 224</p> <p>7.15.4 Liquid and Vapor Separators 225</p> <p>7.15.5 Recycle Gas Compression and Distribution 226</p> <p>7.15.6 Hydrogen Distribution 226</p> <p>7.15.7 Control of the Hydrogen System 226</p> <p>7.15.8 Reactor Design 227</p> <p>7.16 Hydrocracker Fractionating Unit 228</p> <p>7.16.1 Mild Vacuum Column 230</p> <p>7.16.2 Steam Generation 230</p> <p>7.17 Operating Variables 231</p> <p>7.18 Hydrotreating Process 234</p> <p>7.18.1 Process Description 237</p> <p>7.18.2 Process Variables 237</p> <p>7.18.3 Hydrotreating Catalysts 240</p> <p>7.19 Thermodynamics of Hydrotreating 240</p> <p>7.20 Reaction Kinetics 243</p> <p>7.21 Naphtha Hydrotreating 245</p> <p>7.21.1 Hydrotreating Correlations 245</p> <p>7.21.2 Middle Distillates Hydrotreating 248</p> <p>7.21.3 Middle Distillate Hydrotreating Correlations 248</p> <p>7.22 Atmospheric Residue Desulfurization 250</p> <p>7.22.1 High-Pressure Separator 252</p> <p>7.22.2 Low-Pressure Separator 252</p> <p>7.22.3 Hydrogen Sulfide Removal 252</p> <p>7.22.4 Recycled Gas Compressor 252</p> <p>7.22.5 Process Water 252</p> <p>7.22.6 Fractionation Column 253</p> <p>7.22.7 Operating Conditions of Hydrotreating Processes 253</p> <p>7.23 Health, Safety and Environment Considerations 258</p> <p>References 258</p> <p><b>8 Catalytic Cracking 259 </b></p> <p>8.1 Introduction 259</p> <p>8.2 Fluidized Bed Catalytic Cracking 262</p> <p>8.2.1 Process Description 262</p> <p>8.3 Modes of Fluidization 269</p> <p>8.4 Cracking Reactions 270</p> <p>8.4.1 Secondary Reactions 272</p> <p>8.5 Thermodynamics of FCC 273</p> <p>8.5.1 Transport Phenomena, Reaction Patterns and Kinetic models 273</p> <p>8.5.2 Three- and Four-Lump kinetic models 276</p> <p>8.6 Process Design Variables 278</p> <p>8.6.1 Process Variables 279</p> <p>8.6.2 Process Operational Variables 280</p> <p>8.7 Material and Energy Balances 281</p> <p>8.7.1 Material Balance 281</p> <p>8.7.2 Energy Balance 282</p> <p>8.8 Heat Recovery 283</p> <p>8.9 FCC Yield Correlations 284</p> <p>8.10 Estimating Potential Yields of FCC Feed 286</p> <p>8.11 Pollution Control 290</p> <p>8.12 New Technology 292</p> <p>8.12.1 Deep Catalytic Cracking 293</p> <p>8.12.2 Shell’s Fluid Catalytic Cracking 294</p> <p>8.12.3 Fluid Catalytic Cracking High Severity 295</p> <p>8.12.4 Fluid Catalytic Cracking for Maximum Olefins 295</p> <p>8.13 Refining/Petrochemical Integration 296</p> <p>8.14 Metallurgy 296</p> <p>8.15 Troubleshooting for Fluidized Catalyst Cracking Units 297</p> <p>8.16 Health, Safety and Environment Considerations 298</p> <p>8.17 Licensors’ Correlations 299</p> <p>8.18 Simulation and Modeling Strategy 300</p> References 304<br /> <p><b>9 Catalytic Reforming and Isomerization 305</b></p> <p>9.1 Introduction 305</p> <p>9.2 Catalytic Reforming 306</p> <p>9.3 Feed Characterization 306</p> <p>9.4 Catalytic Reforming Processes 308</p> <p>9.4.1 Role of Reformer in the Refinery 309</p> <p>9.4.2 UOP Continuous Catalytic Regeneration (CCR) Reforming Process 310</p> <p>9.5 Operations of the Reformer Process 312</p> <p>9.5.1 Effect of Major Variables in Catalytic Reforming 314</p> <p>9.6 Catalytic Reformer Reactors 316</p> <p>9.7 Material Balance in Reforming 317</p> <p>9.8 Reactions 320</p> <p>9.8.1 Naphthene Dehydrogenation to Cyclohexanes 320</p> <p>9.8.2 Dehydrocyclization of Paraffins to Aromatics 321</p> <p>9.8.3 Dehydroisomerization of Alkylcyclopentanes to Aromatics 321</p> <p>9.8.4 Isomerization of n-Paraffins 321</p> <p>9.9 Hydrocracking Reactions 322</p> <p>9.10 Reforming Catalyst 322</p> <p>9.11 Coke Deposition 324</p> <p>9.12 Thermodynamics 326</p> <p>9.13 Kinetic Models 326</p> <p>9.14 The Reactor Model 326</p> <p>9.15 Modeling of Naphtha Catalytic Reforming Process 329</p> <p>9.16 Isomerization 329</p> <p>9.16.1 Thermodynamics 330</p> <p>9.16.2 Isomerization Reactions 331</p> <p>9.17 Sulfolane Extraction Process 331</p> <p>9.17.1 Sulfolane Extraction Unit (SEU) Corrosion Problems 332</p> <p>9.17.2 Other Solvents for the Extraction Unit 333</p> <p>9.18 Aromatic Complex 333</p> <p>9.18.1 Aromatic Separation 335</p> <p>9.19 Hydrodealkylation Process 336</p> <p>9.19.1 Separation of the Reactor Effluents 337</p> References 337 <p><b>10 Alkylation and Polymerization Processes 339 </b></p> <p>10.1 Introduction 339</p> <p>10.2 Chemistry of Alkylation 340</p> <p>10.3 Catalysts 342</p> <p>10.4 Process Variables 343</p> <p>10.5 Alkylation Feedstocks 345</p> <p>10.6 Alkylation Products 346</p> <p>10.7 Sulfuric Acid Alkylation Process 346</p> <p>10.8 HF Alkylation 347</p> <p>10.9 Kinetics and Thermodynamics of Alkylation 351</p> <p>10.10 Polymerization 354</p> <p>10.11 HF and H<sub>2</sub>SO<sub>4</sub> Mitigating Releases 354</p> <p>10.12 Corrosion Problems 356</p> <p>10.13 A New Technology of Alkylation Process Using Ionic Liquid 356</p> <p>10.14 Chevron – Honeywell UOP Ionic liquid Alkylation 357</p> <p>10.15 Chemical Release and Flash Fire: A Case Study of the Alkylation Unit at the Delaware City Refining Company (DCRC) Involving Equipment Maintenance Incident 358</p> <p>References 362</p> <p><b>11 Hydrogen Production and Purification 365 </b></p> <p>11.1 Hydrogen Requirements in a Refinery 365</p> <p>11.2 Process Chemistry 366</p> <p>11.3 High-Temperature Shift Conversion 368</p> <p>11.4 Low-Temperature Shift Conversion 368</p> <p>11.5 Gas Purification 368</p> <p>11.6 Purification of Hydrogen Product 369</p> <p>11.7 Hydrogen Distribution System 370</p> <p>11.8 Off-Gas Hydrogen Recovery 371</p> <p>11.9 Pressure Swing Adsorption (PSA) Unit 371</p> <p>11.10 Refinery Hydrogen Management 375</p> <p>11.11 Hydrogen Pinch Studies 377</p> <p>References 379</p> <p><b>12 Gas Processing and Acid Gas Removal 381 </b></p> <p>12.1 Introduction 381</p> <p>12.2 Diesel Hydrodesulfurization (DHDS) 383</p> <p>12.3 Hydrotreating Reactions 383</p> <p>12.4 Gas Processing 388</p> <p>12.4.1 Natural Gas 388</p> <p>12.4.2 Gas Processing Methods 389</p> <p>12.4.3 Reaction Gas Processes 390</p> <p>12.4.4 Sweetening Process 390</p> <p>12.4.5 MEROX Process 390</p> <p>12.5 Sulfur Management 391</p> <p>12.5.1 Sulfur Recovery Processes 393</p> <p>12.5.2 Tail Gas Clean Up 401</p> <p>12.6 Physical Solvent Gas Processes 401</p> <p>12.6.1 Physical and Chemical Processes 402</p> <p>12.6.2 Advantages and Disadvantages of the Sulfinol<sup>®</sup> Process 402</p> <p>12.7 Carbonate Process 402</p> <p>12.8 Solution Batch Process 403</p> <p>12.9 Process Description of Gas Processing using UniSim<sup>®</sup> Simulation 405</p> <p>12.10 Gas Dryer (Dehydration) Design 410</p> <p>12.10.1 The Equations 412</p> <p>12.10.2 Pressure Drop (ΔP) 413</p> <p>12.10.3 Fouled Bed 413</p> <p>12.11 Kremser-Brown-Sherwood Method-No Heat of Absorption 415</p> <p>12.11.1 Absorption: Determine Component Absorption in Fixed Tray Tower (Adapted in part from Ref. 12) 415</p> <p>12.11.2 Absorption: Determine the Number of Trays for Specified Product Absorption 417</p> <p>12.11.3 Stripping: Determine the Number of Theoretical Trays and Stripping Steam or Gas Rate for a Component Recovery 418</p> <p>12.11.4 Stripping: Determine Stripping-Medium Rate for a Fixed Recovery 420</p> <p>12.12 Absorption: Edmister Method 421</p> <p>12.12.1 Absorption and Stripping Efficiency 427</p> <p>12.13 Gas Treating Troubleshooting 432</p> <p>12.13.1 High Exit Gas Dew Point 432</p> <p>12.13.2 High Glycol Losses 432</p> <p>12.13.3 Glycol Contamination 432</p> <p>12.13.4 Poor Glycol Reconcentration 433</p> <p>12.13.5 Low Glycol Circulation – Glycol Pump 433</p> <p>12.13.6 High Pressure Drop Across Contactor 433</p> <p>12.13.7 High Stripping Still Temperature 433</p> <p>12.13.8 High Reboiler Pressure 433</p> <p>12.13.9 Firetube Fouling/Hot Spots/Burn Out 433</p> <p>12.13.10 High Gas Dew Points 433</p> <p>12.13.11 Cause – Inadequate Glycol Circulation Rate 433</p> <p>12.13.12 Low Reboiler Temperature 433</p> <p>12.13.13 Flash Separator Failure 434</p> <p>12.13.14 Cause – Insufficient Reconcentration of Glycol 434</p> <p>12.13.15 Cause – Operating Conditions Different from Design 434</p> <p>12.13.16 Cause – Low Gas Flow Rates 434</p> <p>12.13.17 High Glycol Loss 434</p> <p>12.14 Cause – Loss of Glycol Out of Still Column 434</p> <p>12.15 The ADIP Process 435</p> <p>12.16 Sour Water Stripping Process 435</p> References 438<br /> <p>Glossary of Petroleum and Technical Terminology 441</p> <p>Appendix A Equilibrium K values 533</p> <p>Appendix B Analytical Techniques 547</p> <p>Appendix C Physical and Chemical Characteristics of Major Hydrocarbons 557</p> <p>Appendix D A List of Engineering Process Flow Diagrams and Process Data Sheets 573</p> <p>Index 623</p>
<p><b>Kayode Coker</b> PhD, is Engineering Consultant for AKC Technology, an Honorary Research Fellow at the University of Wolverhampton, U.K., a former Engineering Coordinator at Saudi Aramco Shell Refinery Company and Chairman of the department of Chemical Engineering Technology at Jubail Industrial College, Saudi Arabia. He has been a chartered chemical engineer for more than 30 years. He is a Fellow of the Institution of Chemical Engineers, U.K. and a senior member of the American Institute of Chemical Engineers. He holds a B.Sc. honors degree in Chemical Engineering, a Master of Science degree in Process Analysis and Development and Ph.D. in Chemical Engineering, all from Aston University, Birmingham, U.K. and a Teacher's Certificate in Education at the University of London, U.K. He has directed and conducted short courses extensively throughout the world and has been a lecturer at the university level. His articles have been published in several international journals. He is an author of five books in chemical engineering, a contributor to the <i>Encyclopedia of Chemical Processing and Design. Vol 61</i>. He was named as one of the <i>International Biographical Centre's Leading Engineers of the World</i> for 2008. Also, he is a member of <i>International Who's Who of Professionals</i>TM and <i>Madison Who's Who in the U.S.</i>
<p><b>The most comprehensive and up-to-date coverage of the advances of petroleum refining designs and applications, written by one of the world's most well-known process engineers, this is a must-have for any chemical, process, or petroleum engineer.</b> <p>There is a renaissance that is occurring in chemical and process engineering, and it is crucial for today's scientists, engineers, technicians, and operators to stay current. With so many changes over the last few decades in equipment and processes, petroleum refining is almost a living document, constantly needing updating. With no new refineries being built, companies are spending their capital re-tooling and adding on to existing plants. Refineries are like small cities, today, as they grow bigger and bigger and more and more complex. A huge percentage of a refinery can be changed, literally, from year to year, to account for the type of crude being refined or to integrate new equipment or processes. <p>This book is the most up-to-date and comprehensive coverage of the most significant and recent changes to petroleum refining, presenting the state-of-the-art to the engineer, scientist, or student. Useful as a textbook, this is also an excellent, handy go-to reference for the veteran engineer, a volume no chemical or process engineering library should be without. Written by one of the world's foremost authorities, this book sets the standard for the industry and is an integral part of the petroleum refining renaissance. It is truly a must-have for any practicing engineer or student in this area. <p><b>This groundbreaking new volume:</b> <ul> <li>Assists engineers in rapidly analyzing problems and finding effective design methods and selecting mechanical specifications</li> <li>Provides improved design manuals to methods and proven fundamentals of process design with related data and charts</li> <li>Covers a complete range of basic day–to–day petroleum refining operations topics with new materials on significant industry changes since 2005</li> <li>Provides UniSim <sup>®</sup>-based case studies for enabling simulation of key processes outlined in the book</li> <li>Helps achieve optimum operations and process conditions, and shows how to translate design fundamentals into mechanical equipment specifications</li> <li>Download software and other material relating to this title from its companion web page at www.scrivenerpublishing.com<i></i></li> </ul>

Diese Produkte könnten Sie auch interessieren:

Hot-Melt Extrusion
Hot-Melt Extrusion
von: Dennis Douroumis
PDF ebook
136,99 €
Hot-Melt Extrusion
Hot-Melt Extrusion
von: Dennis Douroumis
EPUB ebook
136,99 €
Kunststoffe
Kunststoffe
von: Wilhelm Keim
PDF ebook
99,99 €