Details

Atmospheric Pressure Plasma Treatment of Polymers

Relevance to Adhesion
Adhesion and Adhesives: Fundamental and Applied Aspects 1. Aufl.

von: Michael Thomas, K. L. Mittal
181,99 €
Verlag:	Wiley
Format:	EPUB
Veröffentl.:	19.06.2013
ISBN/EAN:	9781118747513
Sprache:	englisch
Anzahl Seiten:	416

In den Warenkorb

Als Gutschein

DRM-geschütztes eBook, Sie benötigen z.B. Adobe Digital Editions und eine Adobe ID zum Lesen.

Beschreibungen

Titelbeschreibung

An indispensable volume detailing the current and potential applications of atmospheric pressure plasma treatment by experts practicing in fields around the world Polymers are used in a wide variety of industries to fabricate legions of products because of their many desirable traits. However, polymers in general (and polyolefins, in particular) are innately not very adhesionable because of the absence of polar or reactive groups on their surfaces and concomitant low surface energy. Surface treatment of polymers, however, is essential to impart reactive chemical groups on their surfaces to enhance their adhesion characteristic. Proper surface treatment can endow polymers with improved adhesion without affecting the bulk properties. A plethora of techniques (ranging from wet to dry, simple to sophisticated, vacuum to non-vacuum) for polymer surface modification have been documented in the literature but the Atmospheric Pressure Plasma (APP) treatment has attracted much attention because it offers many advantages vis-a-vis other techniques, namely uniform treatment, continuous operation, no need for vacuum, simplicity, low cost, no environmental or disposal concern, and applicability to large area samples. Although the emphasis in this book is on the utility of APP treatment for enhancement of polymer adhesion, APP is also applicable and effective to modulate many other surface properties of polymers: superhydrophilicity, superhydrophobicity, anti-fouling, anti-fogging, anti-icing, cell adhesion, biocompatibility, tribological behavior, etc. The key features of Atmospheric Pressure Plasma Treatment of Polymers: <ul> <li>Address design and functions of various types of reactors</li> <li>Bring out current and potential applications of APP treatment</li> <li>Represent the cumulative wisdom of many key academic and industry researchers actively engaged in this key and enabling technology</li> </ul>

Inhaltsverzeichnis

Preface xiii Acknowledgements xvii Part 1: Fundamental Aspects 1 1 Combinatorial Plasma-based Surface Modifi cation of Polymers by Means of Plasma Printing with Gas-Carrying Plasma Stamps at Ambient Pressure 3 Alena Hinze, Andrew Marchesseault, Stephanus Büttgenbach, Michael Thomas and Claus-Peter Klages 1.1 Introduction 4 1.2 Experimental 7 1.3 Results and Discussion 18 1.4 Conclusions 23 Acknowledgements 23 References 24 2 Treatment of Polymer Surfaces with Surface Dielectric Barrier Discharge Plasmas 27 Marcel Šimor and Yves Creyghton 2.1 Introduction 28 2.2 A General Overview of Surface Modification Results Obtained with Surface DBDs 32 2.3 An Overview of Selected Results Obtained at TNO by the SBD 41 2.4 Conclusions 73 References 74 3 Selective Surface Modification of Polymeric Materials by Atmospheric-Pressure Plasmas: Selective Substitution Reactions on Polymer Surfaces by Different Plasmas 83 Norihiro Inagaki 3.1 Introduction 84 3.2 Defl uorination of Poly(tetrafl uoroethylene) Surfaces 86 3.3 Selective Modifi cation of Polymeric Surfaces by Plasma 102 3.4 Summary 120 References 121 4 Permanence of Functional Groups at Polyolefi n Surfaces Introduced by Dielectric Barrier Discharge Pretreatment in Presence of Aerosols 131 R. Mix, J. F. Friedrich and N. Inagaki 4.1 Introduction 131 4.2 Experimental 135 4.3 Results 137 4.4 Discussion 151 4.5 Summary 153 Acknowlegdements 153 References 153 5 Achieving Nano-scale Surface Structure on Wool Fabric by Atmospheric Pressure Plasma Treatment 157 C.W. Kan, W.Y.I. Tsoi, C.W.M. Yuen, T.M. Choi and T.B. Tang 5.1 Introduction 158 5.2 Experimental 159 5.3 Results and Discussion 160 5.4 Conclusions 171 Acknowledgements 171 References 172 6 Deposition of Nanosilica Coatings on Plasma Activated Polyethylene Films 175 D. D. Pappas, A. A. Bujanda, J. A. Orlicki, J. D. Demaree, J. K. Hirvonen, R. E. Jensen and S. H. McKnight 6.1 Introduction 175 6.2 Experimental 177 6.3 Results and Discussion 179 6.4 Conclusions 194 Acknowledgement 194 References 195 7 Atmospheric Plasma Treatment of Polymers for Biomedical Applications 199 N. Gomathi, A. K. Chanda and S. Neogi 7.1 Introduction 199 7.2 Plasma for Materials Processing 200 7.3 Atmospheric Plasma Sources 202 7.4 Effects of Plasma on Polymer Surface 206 7.5 Atmospheric Plasma in Biomedical Applications 208 7.6 Conclusion 212 References 212 Part 2 Adhesion Enhancement 217 8 Atmospheric Pressure Plasma Polymerization Surface Treatments by Dielectric Barrier Discharge for Enhanced Polymer-Polymer and Metal-Polymer Adhesion 219 Maryline Moreno-Couranjou, Nicolas D. Boscher, David Duday, Rémy Maurau, Elodie Lecoq and Patrick Choquet 8.1 Introduction 220 8.2 Atmospheric Plasma Polymerization Processes 221 8.3 Atmospheric Plasma Surface Modification for Enhanced Adhesion 223 8.4 Applications of Adhesion Improvement Using Atmospheric Pressure Plasma Treatments 240 8.5 Conclusion 246 References 246 9 Adhesion Improvement by Nitrogen Functionalization of Polymers Using DBD-based Plasma Sources at Ambient Pressure 251 Michael Thomas, Marko Eichler, Kristina Lachmann, Jochen Borris, Alena Hinze and Claus-Peter Klages 9.1 Introduction 252 9.2 Amino Functionalization with Nitrogen-Containing Gases 253 9.3 Adhesion Promotion by Amino Functionalization with Nitrogen-Containing Gases 262 9.4 Conclusion 270 Acknowledgements 271 References 271 10 Adhesion Improvement of Polypropylene through Aerosol Assisted Plasma Deposition at Atmospheric Pressure 275 Marjorie Dubreuil, Erik Bongaers and Dirk Vangeneugden 10.1 Introduction 276 10.2 Experimental 278 10.3 Results and Discussion 283 10.4 Conclusions 295 Acknowledgments 296 References 296 11 The Effect of Helium-Air, Helium-Water Vapor, Helium-Oxygen, and Helium-Nitrogen Atmospheric Pressure Plasmas on the Adhesion Strength of Polyethylene 299 Victor Rodriguez-Santiago, Andres A. Bujanda, Kenneth E. Strawhecker and Daphne D. Pappas 11.1 Introduction 300 11.2 Experimental Approach 301 11.3 Results and Discussion 304 11.4 Conclusion 311 Acknowledgements 312 References 312 12 Atmospheric Plasma Surface Treatment of Styrene-Butadiene Rubber: Study of Adhesion and Ageing Effects 315 Cátia A. Carreira, Ricardo M. Silva, Vera V. Pinto, Maria José Ferreira, Fernando Sousa, Fernando Silva and Carlos M. Pereira 12.1 Introduction 316 12.2 Experimental 319 12.3 Results and Discussion 320 12.4 Conclusions 325 Acknowledgements 325 References 326 13 Atmospheric Plasma Treatment in Extrusion Coating: Part 1 Surface Wetting and LDPE Adhesion to Paper 329 Mikko Tuominen, J. Lavonen, H. Teisala, M. Stepien and J. Kuusipalo 13.1 Introduction 330 13.2 Experimental 332 13.3 Results and Discussion 336 13.4 Conclusions 350 Acknowledgements 351 References 351 14 Atmospheric Plasma Treatment in Extrusion Coating: Part 2 Surface Modification of LDPE and PP Coated Papers 355 Mikko Tuominen, J. Lavonen, J. Lahti and J. Kuusipalo 14.1 Introduction 356 14.2 Experimental 359 14.3 Results and Discussion 363 14.4 Conclusions 377 Acknowledgements 379 References 379 15 Achieving Enhanced Fracture Toughness of Adhesively Bonded Cured Composite Joint Systems Using Atmospheric Pressure Plasma Treatments 383 Amsarani Ramamoorthy, Joseph Mohan, Greg Byrne, Neal Murphy, Alojz Ivankovic and Denis P. Dowling 15.1 Introduction 384 15.2 Materials and Methods 385 15.3 Characterisation Techniques 387 15.4 Results and Discussion 388 15.5 Conclusions 393 Acknowledgement 393 References 393

Rezension

“The information provided in this book should be of great interest and value to surface and chemical engineers as well as R&D, manufacturing, and quality control personnel in a host of industries and technological areas such as printing, textile, adhesive bonding, packaging, automotive, aerospace, composites, microfluidics, biomedical, paint, microelectronics, and nanotechnology.” (Materials and Corrosion, 1 August 2013)

Autorenportrait

Michael Thomas is the head of the Department of Atmospheric Pressure Processes at the Fraunhofer Institute for Surface Engineering and Thin Films (IST), Germany, and has more than 15 years' experience in surface technology. Trained as a chemist, his work is focused on fundamental and industrial projects of surface treatment and coatings in the area of plasma processes at atmospheric pressure, with specific interest in adhesion using dielectric barrier discharge and microplasma-based processes. He has published more than 30 technical papers and professional articles and holds 10 patents on the topic of atmospheric pressure plasma technology. Kashmiri Lal Mittal was employed by the IBM Corporation from 1972 through 1993. Currently, he is teaching and consulting worldwide in the broad areas of adhesion as well as surface cleaning. He has received numerous awards and honors including the title of doctor honoris causa from Maria Curie-Skłodowska University, Lublin, Poland. He is the editor of more than 110 volumes dealing with adhesion measurement, adhesion of polymeric coatings, polymer surfaces, adhesive joints, adhesion promoters, thin films, polyimides, surface modification, surface cleaning, and surfactants.

Back cover copy

An indispensable volume detailing the current and potential applications of atmospheric pressure plasma treatment by experts practicing in fields around the world Polymers are used in a wide variety of industries to fabricate legions of products because of their many desirable traits. However, polymers in general (and polyolefins, in particular) are innately not very adhesionable because of the absence of polar or reactive groups on their surfaces and concomitant low surface energy. Surface treatment of polymers, however, is essential to impart reactive chemical groups on their surfaces to enhance their adhesion characteristic. Proper surface treatment can endow polymers with improved adhesion without affecting the bulk properties. A plethora of techniques (ranging from wet to dry, simple to sophisticated, vacuum to non-vacuum) for polymer surface modification have been documented in the literature but the Atmospheric Pressure Plasma (APP) treatment has attracted much attention because it offers many advantages vis-a-vis other techniques, namely uniform treatment, continuous operation, no need for vacuum, simplicity, low cost, no environmental or disposal concern, and applicability to large area samples. Although the emphasis in this book is on the utility of APP treatment for enhancement of polymer adhesion, APP is also applicable and effective to modulate many other surface properties of polymers: superhydrophilicity, superhydrophobicity, anti-fouling, anti-fogging, anti-icing, cell adhesion, biocompatibility, tribological behavior, etc. The key features of Atmospheric Pressure Plasma Treatment of Polymers: <ul> <li>Address design and functions of various types of reactors</li> <li>Bring out current and potential applications of APP treatment</li> <li>Represent the cumulative wisdom of many key academic and industry researchers actively engaged in this key and enabling technology</li> </ul> Readership The information provided in this book should be of great interest and value to surface and chemical engineers as well as R&D, manufacturing, and quality control personnel in a host of industries and technological areas such as printing, textile, adhesive bonding, packaging, automotive, aerospace, composites, microfluidics, biomedical, paint, microelectronics, and nanotechnology.